雪梨视频

2015 Y谋l谋

听2015 y谋l谋nda B枚l眉m眉m眉zde 脺retilen Bilimsel 脟al谋艧malar

听

SSCI- SCI- AHCI Kapsam谋nda Yay谋mlanan Makaleler听听

听

1. Kerli, S., Alver, U., Tanriverdi, A., Avar, B., Structural and physical properties of boron doped ZnO films prepared by chemical spray pyrolysis method 听Crystallography Reports 60听(6), pp. 946-950 ,2015.

2. 艦ennik, E., Kerli, S., Alver, 脺., 脰zt眉rk, Z.Z., Effect of fluorine doping on the NO₂-sensing properties of ZnO thin films,听 Sensors and Actuators, B: Chemical 216, pp. 49-56, 2015.

3. Eskalen, H., 脰z?an, 艦., Alver, 脺., Kerli, S.听 Electro-optical properties of liquid crystals composite with zinc oxide nanoparticles,听 Acta Physica Polonica A 127 (3), pp. 756-760,2015.

4. Varol, T., Canakci, A., The effect of type and ratio of reinforcement on the synthesis and characterization Cu-based nanocomposites by flake powder metallurgy,听 听Journal of Alloys and Compounds 649, 34696, pp. 1066-1074, 2015.

5. Varol, T., Canakci, A., Microstructure, electrical conductivity and hardness of multilayer graphene/Copper nanocomposites synthesized by flake powder metallurgy,听 Metals and Materials International 21听(4), pp. 704-712, 2015.

6. Erdemir, F., Canakci, A., Varol, T., Ozkaya, S. Corrosion and wear behavior of functionally graded Al2024/SiC composites produced by hot pressing and consolidation, 听Journal of Alloys and Compounds 644, 34100, pp. 589-596, 2015.

7. Canakci, A.,听Varol, T.,听Ozsahin, S. Artificial neural network to predict the effect of heat treatment, reinforcement size, and volume fraction on AlCuMg alloy matrix composite properties fabricated by stir casting method 听International Journal of Advanced Manufacturing Technology 78听(1-4), pp. 305-317, 2015.

听

SCI Expanded ? EI-ECONLIT-CCI-CMCI-IM-CIJE-DI-MLA_DOAJ-EBSCO Kapsam谋nda Yay谋mlanan Makaleler

1. Alver, U.,听Kerli, S.,听Tanriverdi, A.,Yaykasli, H, Synthesis of boron doped ZnO particles by hydrothermal method 听Journal of Optoelectronics and Advanced Materials 17听(3-4), pp. 439-443,2015.

2. Varol, T., Canakci, A., Effect of the CNT Content on Microstructure, Physical and Mechanical Properties of Cu-Based Electrical Contact Materials Produced by Flake Powder Metallurgy, 听Arabian Journal for Science and Engineering听 40听(9), pp. 2711-2720, 2015.

3. Canakci, A.,听Varol, T.,听Erdemir, F.,Ozkaya, S.听 New Coating Technique for Al?B4C Composite Coatings by Mechanical Milling and Composite Coating ,Powder Metallurgy and Metal Ceramics (Article in press).

4.Canakci, A.,听Varol, T.,听Cuvalci H.,Erdemir, F.,听Ozkaya, S., Development and characterization of bronze-Cr-Ni composites produced by powder metallurgy,听 听Science and Engineering of Composite Materials 22听(4), pp. 425-432, 2015.

5. Varol, T., Canakci, A., Ozsahin, S., Modeling of the prediction of densification behavior of powder metallurgy Al-Cu-Mg/B4C composites using artificial neural networks, 听Acta Metallurgica Sinica (English Letters) 28听(2), pp. 182-195, 2015.

6. Canakci, A.,听Varol, T.,听Cuvalci, H.,Erdemir, F.,听Ozkaya, S.,听 Synthesis and characterization of hybrid nanocomposite powders via mechanical alloying,听 Revista Romana de Materiale/ Romanian Journal of Materials 45听(1), pp. 67-72, 2015.

7. Canakci, A.,听Varol, T.听 A novel method for the production of metal powders without conventional atomization process, 听Journal of Cleaner Production 99, pp. 312-319, 2015.

8. Kaftelen H., Kanar D.E. , Repp S., Weber S., Erdem E., "Investigation of Mn-doped sodium-potassium niobate ((K,Na)NbO3) ceramics by EPR and impedance spectroscopic methods", Ferroelectr谋cs, vol.494, pp.1-5, 2015

听

Uluslararas谋 Bildiriler

1.听脰mer Akg眉l, S. Kerli, A. Tanr谋verdi,听脺. Alver" Synthesis and Characterization Zinc Oxide-Reduced Graphene Oxide Composite", 9th International Physics Conference of the Balkan Physical Union (BPU9), Istanbul, 听page 402, (2015)

2. 脰mer Akg眉l, A.Tanr谋verdi, S. Kerli,听脺. Alver听,"Characterization Of Graphene Oxide Produced by Hummers Method and Its Supercapacitor Applications",听 9th International Physics Conference of the Balkan Physical Union (BPU9), Istanbul, 听page 517, (2015)

3. 脰mer Akg眉l S. Kerli, A. Tanr谋verdi,听脺. Alver, ZnO/TiO2 Metal Oxide Particles and Their Solar Cell Application", 9th International Physics Conference of the Balkan Physical Union (BPU9), Istanbul, 听page 517, (2015)听

4. Ay莽a Tanr谋verdi, H. Yayka艧l谋,听脺. Alver, S. Kerli, "Fabrication of Dye-Sensitized Solar Cell (DSSC) with Boron Doped ZnO Nanoparticles", 9th International Physics Conference of the Balkan Physical Union (BPU9), Istanbul, 听page 526, (2015)

5. Ay莽a Tanr谋verdi,听脺. Alver, 脰.Akg眉l, "RGO/ZnO Nanocomposite Metarial and Its Supercapacitor Performance", 9th International Physics Conference of the Balkan Physical Union (BPU9), Istanbul, 听page 526, (2015)

6. Ay莽a Tanr谋verdi, G. Top, 脰. Akg眉l, H. Yayka艧l谋, S. Kerli,听脺. Alver, "NiO Nanostructures For Supercapacitors", 9th International Physics Conference of the Balkan Physical Union (BPU9), Istanbul, 听page 527, (2015)

听

Tamamlanan Y眉ksek Lisans ve Doktora Tezleri

听

Aluminyum-B₄C par莽ac谋k takviyeli metal matrisli nanokompozitlerin 眉retimi, i莽 yap谋, fiziksel, mekanik ve tribolojik 枚zelliklerinin incelenmesi Serdar 脰ZKAYA, Fen Bilimleri Enstit眉s眉,2015.

听

Y眉r眉t眉len ve Tamamlanan T脺B陌TAK, SAN-TEZ, Kamu Kurum ve Kurulu艧lar谋 Projeleri

听

1.听 听?Nano Partik眉l Takviyeli Fonksiyonel Derecelendirilmi艧 Yeni Elektrik Kontak Malzemelerinin 脺retimi Ve Karakterizasyonu? TUB陌TAK 114M070, Temmuz 2014.

2.听 听 听"Hibrit Ve Elektrikli Ara莽lar 陌莽in Y眉ksek Performansl谋 Sert(Kal谋c谋) M谋knat谋slar谋n谋n H谋zl谋 Kat谋la艧ma Y枚ntemi ile 脺retimi Ve 脰zelliklerinin Geli艧tirilmesi?, TUB陌TAK 114M501, Eyl眉l 2014.听听听听听听听听听听听听

3.听 听?Metal Nanopartik眉l Katk谋l谋 Grafen Esasl谋 Biyouyumlu Aktuator (Eyleyici) Sentezi, Dinamik Analizi Ve Kontrol眉?,听 TUB陌TAK 114M826,听 Ekim 2014.听听听听听听听听听

4.听 听 听听?Kat谋 Oksit Yak谋t Pillerinde(Koyp) Kullan谋lan 陌nterkonnekt枚r Plakalar谋n Toz Metalurjisi(T/M) Y枚ntemiyle 脺retimi Ve Performans De臒erlendirmeleri?, TUB陌TAK 114M502, Kas谋m 2014.听听听

5.听听听听听听?H谋zl谋 Kat谋la艧t谋rma Y枚nteminde Kullan谋lan Melt Spinnig Cihaz谋nda D枚ner Diskin 听So臒utma Sisteminin Geli艧tirilmesi?, TUB陌TAK 115M113, Nisan 2015.

听

6.听听听听听听?S眉perkapasit枚rler i莽in Grafin/ZnO : B nanokompozit elektrot yap谋m谋?, TUB陌TAK 113F044, Ekim 2015(tamamland谋).

听

Y眉r眉t眉len ve Tamamlanan 脺niversiteye Yap谋lan Projeler

听

1.听 听听?Grafenmetal nanokompozit elektrotlar谋n 眉retimi ve iyonik polimer eyleyicilerde kullan谋m谋?, BAP Arast谋rma Projesi,(Devam ediyor).

2. ?Yerinde toz metal眉rji YTM metodu ile AlAl2O3 kompozit 眉retimi? BAP 础谤补艧迟谋谤尘补 Projesi, (Devam ediyor).听听听听听听

3. ?Z谋rhl谋 yelekler i莽in fonksiyonel derecelendirilmi艧 hibrit nanokompozit malzemelerin 眉retimi ve 枚zelliklerinin incelenmesi? BAP 础谤补艧迟谋谤尘补 Projesi, (Devam ediyor).听听听听听听听

4.?ZA27/B₄C(nanopar莽ac谋k)-Grafen(nanolevha) Hibrit Nanokompozit Yatak Malzemelerinin 脺retimi ve Tribolojik 脰zelliklerinin 陌ncelenmesi? BAP 础谤补艧迟谋谤尘补 Projesi (Devam ediyor).

2016 Y谋l谋

听听听

2016 y谋l谋nda B枚l眉m眉m眉zde 脺retilen Bilimsel 脟al谋艧malar

听

SSCI- SCI- AHCI Kapsam谋nda Yay谋mlanan Makaleler

听

1. U. Alver, A. Tanr谋verdi, and 脰. Akg眉l,听 ?Hydrothermal preparation of ZnO electrodes synthesized from different precursors for electrochemical supercapacitors? Synthetic Metals, 211 (2016) 30-34.

2. U. Alver, A. Tanr谋verdi, ?Boron doped ZnO embedded into reduced graphene oxide forelectrochemical supercapacitors? Applied Surface Science 378 (2016) 368?3743.

3. H. Kaftelen, D. E. Kanar, S. Repp, S. Weber, E. Erdem, Investigation of Mn-doped sodium-potassium niobate ((K,Na)NbO3) ceramics by EPR and impedance spectroscopic methods. Ferroelectrics 494 (2016) 1-8.

4. 脰zkaya S., 脟anak莽i A., "Effect of the B4C content and the milling time on the synthesis, consolidation and mechanical properties of AlCuMg-B4C nanocomposites synthesized by mechanical milling", Powder Technology, vol.297 Pages 8-16, 2016.

5. Madsen B., Aslan M., Hans L. (2016) Fractographic observations of the microstructural characteristics of flax fibre composites. Composites Science and Technology 123 (2016) 151-162

听

SCI Expanded ? EI-ECONLIT-CCI-CMCI-IM-CIJE-DI-MLA_DOAJ-EBSCO Kapsam谋nda Yay谋mlanan Makaleler

1. Varol T., Canakci, A., ?The Effect of Flake Microstructure on the Preparation and Properties of Cu?Graphite Sintered Nanocomposites?, Powder Metallurgy and Metal Ceramics, Vol. 55, pp. 426-435, 2016.

2. Varol T., Canakci, A., Erdemir F., ?The Effect of Flake Powder Metallurgy on the Microstructure and Densification Behavior of B4C Nanoparticle-Reinforced Al?Cu?Mg Alloy Matrix Nanocomposites?, Arabian Journal of Science and Engineering, Vol.41, pp. 1781-1796, 2016.

3. Varol T., Canakci, A., Erdemir F., ?The Effect of Flake Powder Metallurgy on the Microstructure and Densification Behavior of B4C Nanoparticle-Reinforced Al?Cu?Mg Alloy Matrix Nanocomposites?, Arabian Journal of Science and Engineering, Vol.41, pp. 1781-1796, 2016.

4. Varol T., Canakci, A., Ozkaya S., Erdemir F., ?Determining the effect of flake matrix size and Al2O3 content on microstructure and mechanical properties of Al2O3 nanoparticle reinforced Al matrix composites?, Particulate Science and Technology, DOI.10.1080/02726351.2016.1248259, 2016.

5. Varol T., Canakci, A., Yalcin, E.D., ?Fabrication of NanoSiC-Reinforced Al2024 Matrix Composites by a Novel Production Method?, Arabian Journal of Science and Engineering, DOI.10.1007/s13369-016-2295-z, 2016.

6. Varol T., Canakci, A., ?An Investigation on Wear Behavior of 听Cu-Graphite Nanocomposites Prepared by Flake Powder Metallurgy?, Industrial Lubrication and Tribology, DOI.10.1108/ILT-11-2015-0187, 2016

7. Ali Karaipekli, Ahmet Sar谋, Alper Bi莽er, Thermal regulating performance of gypsum/(C18?C24) composite phase change material (CPCM) for building energy storage applications, Applied Thermal Engineering 107 (2016) 55?62.

8. Ahmet Sar谋, Thermal energy storage characteristics of bentonite-based composite PCMs with enhanced thermal conductivity as novel thermal storage building materials, Energy Conversion and Management 117 (2016) 132-141.

9. Ahmet Sar谋, Cemil Alkan, Alper Bi莽er, Thermal energy storage characteristics of micro-nanoencapsulated heneicosane and octacosane with poly(methylmethacrylate) shell. J Microencapsul 19 (2016) 221-228.

10. Tawfik A. Saleha, Ahmet Sar谋, Mustafa Tuzen, Chitosan-modified vermiculite for As(III) adsorption from aqueous solution: Equilibrium, thermodynamic and kinetic studies, Journal of Molecular Liquids 219 (2016) 937?945.

11. Ali Karaipekli, Ahmet Sar谋, Development and thermal performance of pumice/organic PCM/gypsum composite plasters for thermal energy storage in buildings, Solar Energy Materials & Solar Cells 149 (2016) 19?28.

12. Dalmi艧, R., Cuvalci, H., Canakci, A, Guler, O., ?Investigation of graphite nano particle addition on the physical and mechanical properties of ZA27 composites?, Advanced Composites Letters, Vol. 25, Iss.2, 2016, 37-42.(SCI-Expanded).

13. Tufan M., Akbas S., Aslan M., Decay resistance, Thermal degradation, Tensile and flexural properties of sisal-carbon hybrid composites听 Maderas: Ciencia Tecnolog铆a 18(4): 599 - 606, 2016

听

Di臒er Uluslararas谋 Hakemli Dergilerde Yay谋nlanm谋艧 Tam Makale

听

1.听听听 H. KAFTELEN,听 Farin ilavesinin 莽ini b眉nye 枚zelliklerine etkisi, F谋rat 脺niversitesi Fen ve M眉hendislik Bilimleri dergisi, Cilt 28, say谋 2, (2016) 51-55.

听

2.听听听 C. Nazik, N. Tarakcioglu, S. Ozkaya, F. Erdemir, A. Canakci, "Determination of Effect of B4C Content on Density and Tensile Strength of AA7075/ B4C Composite Produced via Powder Technology", International Journal of Materials Mechanics and Manufacturing, Vol. 4, No. 4, pp. 251-254, 2016. Index (SCI-EI).

听

Uluslararas谋 Bildiri

听

1.听脰zt眉rk S., S眉nb眉l S.E., 陌cin K., 脰zt眉rk B., Ero臒lu M., "Melt Spinning Y枚ntemiyle Aa6060 Al眉m谋nyum Ala艧谋m谋 艦erit 脺retimi Ve 陌ncelenmesi", International Conference on Material Science and Technology, NEV艦EH陌R, T脺RKIYE, 6-8 Nisan 2016, pp.440-444

2. 脰zt眉rk S., 陌cin K., Kaftelen H., 脰zt眉rk B., Topal U. , Meto臒lu A., "Melt Spinning Y枚ntemiyle Ndfeb Manyetik Tozlar谋n 脺retimi Ve Karakterizasyonu", International Conference on Material Science and Technology, NEV艦EH陌R, T脺RKIYE, 6-8 Nisan 2016, pp.428-433

3. 脰zt眉rk S., 陌cin K., 脰zt眉rk B., Topal U. , Kaftelen H., "Improvement Of Magnet谋c Propert谋es Of Melt-Spun Produced Nd2fe14b Part谋cles Dur谋ng Surfactant-Ass谋sted Ball M谋ll谋ng", Internat谋onal Energy & Eng谋neer谋ng Conference, Gaziantep, T眉rk谋ye, 13-14 Ekim 2016, pp.220-227

4. 脰zt眉rk S., 陌cin K., 脰zt眉rk B., Topal U. , Kaftelen H., "H谋zl谋 Kat谋la艧t谋r谋lm谋艧 Nd-Fe-B Sert Manyetik Tozlar谋n Yap谋sal,Termal Ve Manyetik Karakterizasyonu", Internat谋onal Energy & Eng谋neer谋ng Conference, Gaziantep, T眉rk谋ye, 13-14 Ekim 2016, pp.68-81

5. 脰zt眉rk S., S眉nb眉l S.E., 陌cin K., 脰zt眉rk B., Ero臒lu M., "Melt Spinning Metoduyla Aa6060 Alum谋nyum Ala艧谋m谋 Toz 脺retiminin 陌ncelenmesi", International Conference on Material Science and Technology, NEV艦EH陌R, T脺RKIYE, 6-8 Nisan 2016, pp.171-176

6. 脰. Akgu?l, 脺. Alver, and A. Tanr谋verdi ?Characterization of graphene oxide produced by Hummers method and its听 supercapacitor applications? AIP Conference Proceedings 1722 , 280001 (2016).

7. S. Kerli , 脰. Akgu?l , and 脺. Alver ?ZnO/TiO2 particles and their solar cell application? AIP Conference Proceedings 1722 ,听 280002 (2016).

8. S. Kerli,听 脺.础濒惫别谤, ?Supercapacitor Behaviour of Boron Doped Cobalt Oxide Films? International Conference on听 Engineering and Natural Sciences (ICENS), Sarajevo, page 162, (2016).

9. S. Kerli,听 脺.础濒惫别谤, ?Preparation And Solar Cell Applications Of Zno/Nio Composite Particles?听 International Conference on Engineering and Natural Sciences (ICENS), Sarajevo, page 193, (2016)

10. 脺.础濒惫别谤 , S. Kerli, ?Zno Particles For Supercapacitor Electrodes? International Conference on Engineering and Natural Sciences (ICENS), Sarajevo, page 758, (2016)

11.脺. Alver, S. Kerli, ?RGO / NiO Nano Composite Powder For Supercapacitor Electrodes? International Conference on Engineering and Natural Sciences (ICENS), Sarajevo, page 759, (2016).

12. H. Kaftelen, "Effect of Fly Ash on the Properties of Sanitaryware Ceramics", International Black Sea Mining and Tunnelling Symposium, Proceeding book, 2-4 November 2016, 雪梨视频, Trabzon, pp. 410-416 (tam metni bas谋lm谋艧 s枚zl眉 bildiri).

13. H. Kaftelen,听 D. E. Kanar, M. 陌tik, M.Y. Coskun, C. Sancak, " RGO Electrode Materials Prepared by Multi Step Reduction Method for Ionic Electroactive Biopolymer Actuators" Graphene, 3RD Emerging 2D Materials & Graphene Conference,听 October 20-21, 2016, Hilton Kozyatagi Hotel, Istanbul, Abstract book, p.49.

14. H. Kaftelen, D. Emre Kanar, M. 陌tik, "One pot synthesis of Ag nanoparticles /RGO nanocomposites and their application in PVDF based polymer actuators" 12th Nanoscience and Nanotechnology conference, 03-05 June 2016, Gebze Technical University, Gebze, T眉rkiye.

15. Sezer R., H谋zl谋 陌.G. , Bilen A., Ert眉rk S., Arslan C., "Effect of Mechanical Activation on .Roasting of Celestite Ore", International Black Sea Mining & Tunnelling Symposium, TRABZON, T脺RKIYE, 2-4 Kas谋m 2016, pp.461-466

16. Bilen A., H谋zl谋 陌.G. , Sezer R., Ert眉rk S., Arslan C., "Investigating the Dissolution of Celestite in BaCl2 and MgCl2 Medium", International Black Sea Mining & Tunnelling Symposium, Trabzon, T眉rkiye, 2-4 Kas谋m 2016, pp.479-484

17. Madsen B., Lester C L., Mortensen U. A., Aslan M., Lilholt H. Microstructure, quantification and control of dislocations in bast?type plant fibres ECCM17, 26?30th June, 2016 Munich, Germany.

18. Varol T., Canakci A., Erdemir F., ?Tribological Performance Under dry Sliding Conditions of Copper-Graphene Nanocomposites?, 16th International Materials Symposium IMSP'2016, Pamukkale University, Denizli, Turkey, 12-14 Oct 2016

19. Varol T., Canakci A., Ozkaya S., Cuvalc谋 H., ?Metallic Biomaterials: Biocompatibility and Mechanical Properties?, 16th International Materials Symposium IMSP'2016, Pamukkale University, Denizli, Turkey, 12-14 October 2016

20. Varol T., Canakci A., Erdemir F., ?Effect of CNT content on the synthesis and characterization of Copper-CNT composites fabricated by ball milling technique?, 16th International Materials Symposium IMSP'2016, Pamukkale University, Denizli, Turkey, 12-14 October 2016

21. Varol T., Canakci A., Yalcin E.D., Ozkaya S., ?Properties of Silicon Carbide Matrix Nanocomposites Prepared by Flake Powder Metallurgy Processing?, 16th International Materials Symposium IMSP'2016, Pamukkale University, Denizli, Turkey, 12-14 October 2016

22. Varol T., Canakci A, 脰zt眉rk A., ?Arc erosion behavior of Cu-nanographite electrical contact materials?, 16th International Materials Symposium IMSP'2016, Pamukkale University, Denizli, Turkey, 12-14 October 2016

23. Varol T., Canakci A., Ozkaya S., Erdemir F., ?Functionally Graded Materials?, 2nd International Conference on Engineering and Natural Sciences (ICENS 2016), Sarajevo, Bosna-Hersek , 24-28 May, 2016, pp. 1643-1649.

24. Canakci, A., Ozkaya S., Varol T., Erdemir F., ?Investigation of Properties of CNT Reinforced HA Biocomposites Produced by Mechanical Alloying Technique?, 2nd International Conference on Engineering and Natural Sciences (ICENS 2016), Sarajevo, Bosna-Hersek , 24-28 May, 2016, pp. 361

25. Ozkaya S., Canakci, A., Varol T., Erdemir F., ?Corrosion Behaviour of AlCuMg/B4C Nanocomposites Produced by powder Metallurgy Method?, 2nd International Conference on Engineering and Natural Sciences (ICENS 2016), Sarajevo, Bosna-Hersek , 24-28 May, 2016, pp. 2846-2849.

26. Yalcin E.D., Canakci A., Ozkaya S., Varol T., ?Study on Microstructure and Wear Properties of B4C Nanoparticle Reinforced ZA27 Nanocomposites?, 2nd International Conference on Engineering and Natural Sciences (ICENS 2016), Sarajevo, Bosna-Hersek , 24-28 May, 2016, pp. 2850-253.

27. Yalcin E.D., Canakci A., Cuvalci H., Varol T., ?Study on Microstructure and Wear Properties of B4C Nanoparticle Reinforced ZA27 Nanocomposites?, 1st International Conference on Engeneering Technology and Applied Sciences Afyon Kocatepe University, Turkey 21-22 April 2016

28. Erdemir F., Canakci A., Yalcin E.D., Varol T., Ozkaya S., ?Development of Response Surface Methodology for Optimization of Process Parameters on the Formation of Fe-Al 陌ntermetallic Coating?, 1st International Mediterranean Science and Engineering Congress (IMSEC 2016) 脟ukurova University, Adana/Turkey, 26-28 October 2016, pp. 2025-2030

29. Yalcin E.D., Canakci A., Erdemir F., Varol T., ?Tribological Behaviours of ZA27/Graphene nanocomposites?, International Conference on Thermophysical and Mechanical Properties of Advanced Materials (THERMAM 2016), Izmir, Turkey, 1-3 September 2016, pp. 1-7.

30. Erdemir F., Canakci A., Yalcin E.D., Varol T., Ozkaya S., ?Wear Investigation of Al2024/SiC Composites by Response Surface Methodology?, International Conference on Thermophysical and Mechanical Properties of Advanced Materials (THERMAM 2016), Izmir, Turkey, 1-3 September 2016, pp. 235-241.

31. Erdemir F., Canakci A., Varol T., ?Electrochemical Corrosion Study of Al2024/SiC Composites?, XIV. The International Corrosion (KORSEM16) Bayburt University, Bayburt/Turkey, 5-7 October 2016, pp. 26-32

32. Ozkaya S., Canakci, A., Erdemir F., Varol T., ?Mekanik Ala艧谋mlaman谋n AlCuMg/B4C Nanokompozitlerinin Korozyon Davran谋艧谋 脺zerine Etkisi?, XIV. The International Corrosion (KORSEM16) Bayburt University, Bayburt/Turkey, 5-7 October 2016, pp. 526-530

33. Ahmet Sar谋, Bentonite/Capric Acid Composite PCMs: Preparation, Characterization and Latent Heat Thermal Energy Storage Characteristics, 2nd INTERNATIONAL TURKIC WORLD CONFERANCE ON CHEMICAL SCIENCES AND TECHNOLOGIES (2nd ITWCCST), October 26-30, 2016 in Skopje, Macedonia, Page:113-115.

34. Ahmet Sar谋, Latent Heat Thermal Energy Storage by Using Phase Change Materials, 2nd INTERNATIONAL TURKIC WORLD CONFERANCE ON CHEMICAL SCIENCES AND TECHNOLOGIES (2nd ITWCCST), October 26-30, 2016 in Skopje, Macedonia, Page:116-119.

35. Ahmet Sar谋, Latent Heat Thermal Energy Storage Characteristics of Kaolin/Capric Acid Composite as a Building Mass with Phase Change-Energy Storage/Release Ability, International Conference on Engineering and Natural Sciences (ICENS 2016), May 24 to 28, 2016 in Sarajevo, Bosnia and Herzegovina, page:59-67.

听

36. Ahmet Sar谋, Thermal energy storage characteristics of bentonitebased composite PCM with enhanced thermal conductivity, International Conference on Engineering and Natural Sciences (ICENS 2016), May听24 to 28, 2016 in Sarajevo, Bosnia and Herzegovina, page:68-77.

听

Ulusal Bildiri

听

1.听听听听听听听听听听听听听听听听听 S. Kerli, 脺. Alver, A. Tanr谋verdi, 脰. Akgu?l, ?Production and Application of RGO/ZnO/TiO2 Composite Material? International Physics Conference at the Anatolian Peak, (IPCAP), Erzurum, page 101 (2016).

听

2.听 A. Tanr谋verdi, 脺. Alver, S. Kerli, 脰. Akgu?l, ?ZnO-Based Dyes Sensitized Solar Cell with Natural Dyes? International Physics Conference at the Anatolian Peak, (IPCAP), Erzurum, page 102 (2016).

听

3. 脰. Akgu?l, 脺. Alver, S. Kerli, A. Tanr谋verdi, ?RGO / ZnO Composite Materials Produced from Different Zinc Salts and Investigation of Their Super Capacitor Performance? International Physics Conference at the Anatolian Peak, 听(IPCAP), Erzurum, page 104 (2016)

听

听

Tamamlanan Y眉ksek Lisans ve Doktora Tezleri

听

1-听听 Y眉ksek Lisans, "Nd-Fe-B ESASLI SERT (KALICI) MIKNATISLARIN MELT SP陌NN陌NG Y脰NTEM陌YLE 脺RET陌M陌, YAPISAL VE MANYET陌K 脰ZELL陌KLER陌N陌N 陌NCELENMES陌", 碍础搁础顿贰狈陌窜 TEKN陌K 脺N陌VERS陌TES陌 Fen Bilimleri Enstit眉s眉 Metalurji ve Malzeme M眉hendisli臒i B枚l眉m眉 Haziran, 2016.

2-听听 Y眉ksek Lisans, ?Melt spinning y枚ntemiyle h谋zl谋 kat谋la艧t谋r谋lm谋艧 CuAl10Ni5Fe4 Ala艧谋m谋 Tozlar谋ndan Kompakt Par莽a 脺retimi ve Tribolojik 脰zelliklerinin 陌ncelenmesi?, Karadeniz Teknik 脺niversitesi, Fen Bilimleri Enstit眉s眉 Metalurji ve Malzeme M眉hendisli臒i B枚l眉m眉, Haziran 2016.

3-听听 Deha Emre Kanar, "Metal nanopartik眉l katk谋l谋 grafen elektrot ve Kitosan elektrolit i莽eren aktuator (eyleyici) sentezi ve dinamik analizi" Fen Bilimleri Enstit眉s眉 Metalurji ve Malzeme M眉hendisli臒i B枚l眉m眉 Eyl眉l 2016.

4-听听 Doktora, "Nano Partik眉l Takviyeli Bak谋r Esasl谋 Fonksiyonel Derecelendirilmi艧 Elektrik Kontak Malzemelerinin 脺retimi ve Karakterizasyonu", 碍础搁础顿贰狈陌窜 TEKN陌K 脺N陌VERS陌TES陌 Fen Bilimleri Enstit眉s眉 Makine M眉hendisli臒i / Malzeme Ocak, 2016.

5-听听 Doktora, "Fonksiyonel Derecelendirilmi艧 Al2024/SiC Kompozitlerinin 脺retimi ve Karakterizasyonu", 碍础搁础顿贰狈陌窜 TEKN陌K 脺N陌VERS陌TES陌 Fen Bilimleri Ensit眉t眉s眉 Makina M眉hendisli臒i Ocak, 2016

听

听

Y眉r眉t眉len ve Tamamlanan T脺B陌TAK, SAN-TEZ, Kamu Kurum ve Kurulu艧lar谋 Projeleri

听

1.听听听 ?Nano Partik眉l Takviyeli Fonksiyonel Derecelendirilmi艧 Yeni Elektrik Kontak Malzemelerinin 脺retimi Ve Karakterizasyonu? TUB陌TAK 114M070, Temmuz 2014.

2.听听听 ?Hibrit Ve Elektrikli Ara莽lar 陌莽in Y眉ksek Performansl谋 Sert(Kal谋c谋) M谋knat谋slar谋n谋n 听H谋zl谋 Kat谋la艧ma Y枚ntemi ile 脺retimi Ve 脰zelliklerinin Geli艧tirilmesi?, TUB陌TAK 114M501, Eyl眉l 2014.听听听听听听听听听听听听听听

3.听听听 ?Metal Nanopartik眉l Katk谋l谋 Grafen Esasl谋 Biyouyumlu Aktuator (Eyleyici) Sentezi, Dinamik Analizi Ve Kontrol眉?,听 TUB陌TAK 114M826,听 Ekim 2014.听听听听听听听听听听听

4.听听听 ?Kat谋 Oksit Yak谋t Pillerinde(Koyp) Kullan谋lan 陌nterkonnekt枚r Plakalar谋n Toz Metalurjisi(T/M) Y枚ntemiyle 脺retimi Ve Performans De臒erlendirmeleri?, TUB陌TAK 114M502, Kas谋m 2014.听听听听

5.听听听 ?H谋zl谋 Kat谋la艧t谋rma Y枚nteminde Kullan谋lan Melt Spinnig Cihaz谋nda D枚ner Diskin 听So臒utma Sisteminin Geli艧tirilmesi?, TUB陌TAK 115M113, Nisan 2015.

听

6.听听听 ?S眉perkapasit枚rler i莽in Grafin/ZnO : B nanokompozit elektrot yap谋m谋?, TUB陌TAK 113F044, Ekim 2015(tamamland谋).

听

7.听听听 Metal Nanopartik眉l Katk谋l谋 Grafen Esasl谋 Biyouyumlu Aktuator (Eyleyici) Sentezi, Dinamik Analizi Ve Kontrol眉, T脺B陌TAK 3001, Proje no. 114M826(tamamland谋)

听

听

Y眉r眉t眉len ve Tamamlanan 脺niversiteye Yap谋lan Projeler

听

1.听听听 ?Toz Metalurjisi ve Metal 艦erit Y枚ntemleriyle 艦ekil Bellekli Ala艧谋mlar谋n 脺retimi ve 脰zelliklerinin 陌ncelenmesi? BAP01 Projesi, BTAP9696, 2016.

2.听听听 ?Toz Metalurjisi Y枚ntemiyle Co-Cr-Mo Esasl谋 陌mplant Malzeme 脺retimi ve Mekanik 脰zelliklerin 陌ncelenmesi? BAP01 Projesi, 2016.听听听听听听听听听听听听

3.听听听 ?Z谋rhl谋 yelekler i莽in fonksiyonel derecelendirilmi艧 hibrit nanokompozit malzemelerin 眉retimi ve 枚zelliklerinin incelenmesi? BAP 础谤补艧迟谋谤尘补 Projesi, (Devam ediyor).听听听听听听听

4.听听听 ?ZA27/B₄C(nanopar莽ac谋k)-Grafen(nanolevha) Hibrit Nanokompozit Yatak Malzemelerinin 脺retimi ve Tribolojik 脰zelliklerinin 陌ncelenmesi? BAP 础谤补艧迟谋谤尘补 Projesi (Devam ediyor).

5.听听听 ?Z谋rhl谋 Yelekler 陌莽in Fonksiyonel Derecelendirilmi艧 Hibrit Nanokompozit Malzemelerin 脺retimi Ve 脰zelliklerinin 陌ncelenmesi? KT脺,听 BAP.

6.听听听 ?ZA27/B4C (nanopar莽ac谋k)-Grafen (nanolevha) Hibrit Nanokompozit Yatak Malzemelerinin 脺retimi ve Tribolojik听听听 脰zelliklerinin 陌ncelenmesi? KT脺,听 BAP.

听

7.听听听 ?Grafenmetal nanokompozit elektrotlar谋n 眉retimi ve iyonik polimer eyleyicilerde kullan谋m谋", KTU BAP Temel 础谤补艧迟谋谤尘补 Projesi, proje no. FBA-2015-5343.

听

8.听听听 ?Polimer kompozit malzeme ile hafif g枚vde ve kabuk tasar谋m谋 ve 眉retimi? KTU BAP02 5238.

听

听

听

2017 Y谋l谋

SSCI- SCI- AHCI Kapsam谋nda Yay谋mlanan Makaleler

1.听听听听听 A.,听 A. Kawasaki,听 S. Ramakrishna, Physicomechanical properties of spark plasma sintered carbon nanotube-reinforced metal matrix nanocomposites, Progress in Materials Science, 90 (2017) 276-324.T. VarolAzarniya,听 A. Azarniya, S. Sovizi,听 H.R.M. Hosseini,听

听

2.听听听听听 ,听 P. Nithyadharseni,听 H.R.M. Hosseini, S. Ramakrishna,听 M.V. Reddy, Physicomechanical properties of spark plasma sintered carbon nanotube-containing ceramic matrix nanocomposites, Nanoscale 9 (2017) 12779-12820.T. VarolAzarniya,听 S. Sovizi,听 A. Azarniya,听 M.R.R.T. Boyuk,听

3.听听听听听 ., "Effect of nano-sized B4C addition on the mechanical properties of ZA27 composites", Journal Of Wuhan University Of Technology-Materials Science Edition, vol.32, pp.747-752, 2017.脟uvalci H., 脟anak莽i A., G眉ler ODalm谋艧 R.,

4.听听听听听 G眉ler O., 脟uvalci H., 脟anak莽i A., 脟别濒别产颈 M., "The Effect Of Nano Graph谋te Part谋cle Content On The Wear Behav谋our Of Za27 Based Hybr谋d Compos谋tes", Advanced Composites Letters, vol.26, pp.30-36, 2017.

5.听听听听听 听 Document Bonding performance of universal adhesives to er,cr:YSGG laser-irradiated enamel, Microscopy Research and Technique,听 80, (2017), 387-393.Erdemir, F.Ayar, M.K.,

6.听听听听听 听Erdemir, F. Study on particle size and X-ray peak area ratios in high energy ball milling and optimization of the milling parameters using response surface method, Measurement: Journal of the International Measurement Confederation, 112, (2017), 53-60.

7.听听听听听 , Artificial neural network-based prediction technique for coating thickness in Fe-Al coatings fabricated by mechanical milling, Particulate Science and Technology, https://doi.org/10.1080/02726351.2017.1301607F. Erdemir,听 S. Ozkaya听 S. Ozsahin,听 Varol,听 A. Canakci,T.

8.听听听听听 G眉ler, O., Tribological behavior of ZA27/Al2O3/graphite hybrid nanocomposites, Particulate Science and Technology,pp. 1-9, 2017脟别濒别产颈, M., 脟anak莽i, A., G枚kda臒, M., 脟uvalc谋, H.,

听

9.听听听听听 G眉ler, O., Cuvalci, H., Canakci, A., Celebi, M., The effect of nano graphite particle content on the wear behaviour of ZA27 based hybrid composites, Advanced Composites Letters 26(2), pp. 30-36, 2017.

SCI Expanded ? EI-ECONLIT-CCI-CMCI-IM-CIJE-DI-MLA_DOAJ-EBSCO Kapsam谋nda Yay谋mlanan Makaleler

1.听听听听听 T. Varol, S. Ozsahin,听 Artificial neural network analysis of the effect of matrix size and milling time on the properties of flake Al-Cu-Mg alloy particles synthesized by ball milling, Particulate Science and Technology, https://doi.org/10.1080/02726351.2017.1381658

2.听听听听听 T. Varol, E.D. Yalcin, Fabrication of NanoSiC-Reinforced Al2024 Matrix Composites by a Novel Production Method, Arabian Journal for Science and Engineering, 42 (2017) 1751-1764A. Canakci,

3.听听听听听 T. Varol,听 A. Canakci, Artificial neural network-based prediction technique for coating thickness in Fe-Al coatings fabricated by mechanical milling, Particulate Science and Technology, https://doi.org/10.1080/02726351.2017.1301607F. Erdemir,听 S. Ozkaya,听 S. Ozsahin,听

4.听听听听听 /Fly ash hybrid composites obtained by hot forging, Progress in Natural Science: Materials International 27(2017) 474-481₂,听 P.G. Koppad, Mechanical and thermal properties of AA7075/TiOT. VarolK.V.M. Shivananda, D.P. Girish,听 R. Keshavamurthy,听

5.听听听听听 T. Varol, An investigation on wear behavior of Cu-graphite nanocomposites prepared by flake powder metallurgy, Industrial Lubrication and Tribology, 69 (2017) pp.8-14.A.听 Canakci,

脰zt眉rk S

., Topal U. , Kaftelen Odaba艧谋 H., G枚b眉l眉k M., et al., "Enhanced Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt-Spinning Technique", Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, vol.48, pp.5017-5030, 2017.听听听听听陌cin K., 脰zt眉rk B.,

Di臒er Uluslararas谋 Hakemli Dergilerde Yay谋nlanm谋艧 Tam Makale

听

1.听听听听听 脰zt眉rk S., 陌cin K., 脰zt眉rk B., Topal U. , Kaftelen Odaba艧谋 H., "Effect of Chill Wheel Cooling on Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt Spinning Method ", International Journal of Materials Science and Applications, vol.6, pp.241-249, 2017听

听

听

听

听

听

Uluslararas谋 Bildiri

1.听听听听听 Temel Varol, Synthesize and Characterization of Sic Nanoparticles by Mechanical Milling Technique, 3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, 205-209.

2.听听听听听 Temel Varol, Aykut Canak莽谋, Application of Artificial Neural Network for Prediction of Coating Thickness in Fe-Al Coatings, 3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017,听 210-214.Fatih Erdemir, Serdar 脰zkaya, 艦眉kr眉 脰z艧ahin,

3.听听听听听 Fatih Erdemir, Aykut Canak莽谋, Temel Varol, Emre Deniz Yal莽谋n, Determining of the Effect of Heat Treatment Parameter on The Gra谋n S谋ze of AISI 316L Stainless Stell Using Taguchi Method, 3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, 219-222.

4.听听听听听 Fatih Erdemir, Aykut Canak莽谋, Temel Varol, M眉slim 脟别濒别产颈, Serdar 脰zkaya, A Review on The Powder Coating with Mechanical Milling, 3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017,听 228-232.

5.听听听听听 Temel Varol, Fatih Erdemir, Aykut Canak莽谋, Fabrication of AL2O3 Nano-Powders by a Planetary Ball Milling Without Process Control Agent, 3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, 233-236.

6.听听听听听 Temel Varol, 艦眉kr眉 脰z艧ahin, Prediction of the Effect of Matrix Size and Milling time on the Particle Size of Flake Al-Cu-Mg Alloy Particles Using Neural Networks, 3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, 237-241.

7.听听听听听 Temel Varol, Aykut Canak莽谋, Fatih Erdemir, Emre Deniz Yal莽谋n, Electrical Contact Materials, 3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, 242-247

8.听听听听听 Canakci A., , The Production and Characterization of B4C and Graphene Nanoparticle Reinforced Fe Based Brake Materials,8th International Advanced Technologies Symposium, Ekim 2017, Elaz谋臒, TurkeyT.Varol, U. Cal谋gulu and S. Ozkaya, M. Celebi K.A. Arpaci,

9.听听听听听 A.H. Karabacak, A. Canakci, T.Varol, F.Erdemir, S.Ozkaya, Characterization and Mechanical Properties of Al2024-SiC Nanocomposites Fabricated by Mechanical Alloying 8th International Advanced Technologies Symposium, Ekim 2017, Elaz谋臒, Turkey

10.听 Aykut 脟anak莽谋, Serdar 脰zkaya, 脰.Yasin Keskin, Temel Varol, Fatih Erdemir, Investigating the Properties of Functionally Graded AlCuMg Metallic Foams, 2nd International Defense Industry Symposium, 6-8 Nisan 2017, K谋r谋kkale, Turkey

11.听 Temel Varol,听 Serdar 脰zkaya,听 Fatih Erdemir, Aykut 脟anak莽谋, Metal Foams, 2nd International Defense Industry Symposium, 6-8 Nisan 2017, K谋r谋kkale, Turkey.

12.听 Fatih Erdemir, Serdar Ozkaya, Temel Varol,听 Aykut 脟anak莽谋, Emre Deniz Yal莽谋n, The ballistic performance of Functionally Graded Al2024/B4C Nanocomposites, 2nd International Defense Industry Symposium, 6-8 Nisan 2017, K谋r谋kkale, Turkey.

13.听 , The Production and Wear and Corrosion Resistance Composite bearing Material Reinforcement with Nanoparticle by Powder Metallurgy, The second of the National Defense Industry Symposium IDEFIS 2017, 6-8 April 2017, K谋r谋kkale, T眉rkiye.Aykut 脟anak莽谋, Hamdullah 脟uvalc谋, Fatih Erdemir, Temel Varol, A. Hasan KarabacakEmre Deniz Yal莽谋n,

14.听 , Mechanical Properties of ZA27/Graphene Nanocomposites Produced by Powder Metallurgy Method, 1 th International Conference on Materials Science and Nanotechnology For next Generation (MsNG-2017) June 28-30, 2017, Sarajevo, BOSNIAM. 脟别濒别产颈 and A. 脟anak莽谋, F. Erdemir, T. Varol,E.D. Yal莽谋n,

15.听 Karabacak, A.H., Canakci, A., Erdemir, F., Varol, T., Yalcin, E.D., ?Microstructure and Some Mechanical Properties of Al2024-B4C Composites Fabricated by Powder Metallurgy??, Icadet, 1314-1321, Bayburt, 2017.

16.听 脰zt眉rk S., 陌cin K., 脰zt眉rk B., Topal U. , Kaftelen Odaba艧谋 H., "The Influence Of Solidification Rate On Hard Magnetic Properties Rare-Earth Permanent Magnetic Powder", 4Th International Conference On Materials Science And Nanotechnology For Next Generation , Saraybosna, BOSNA HERSEK, 28-30 Haziran 2017, pp.62-62

17.听 脰zt眉rk B., 陌cin K., 艦ahin 脰., G枚lba艧i Z., 脰zt眉rk S., "Analytical Hierarchy Process in Material Selection", 2nd International Conference on Advanced Engineering Technologies, BAYBURT, T脺RKIYE, 21-23 Ekim 2017, pp.693-700

18.听 脰zt眉rk S., Ero臒lu M., S眉nb眉l S.E., 陌cin K., 脰zt眉rk B., "THE EFFECT OF Mn AMOUNT ON THE SHAPE MEMORY PROPERTIES OF CuAlMn RIBBONS PRODUCED BY MELT SPINNING METHOD", 2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC?17), NEV艦EH陌R, T脺RKIYE, 11-13 Ekim 2017, pp.67-72

19.听 脰zt眉rk S., Ero臒lu M., S眉nb眉l S.E., 陌cin K., 脰zt眉rk B., "MICROSTRUCTURAL INVESTIGATION OF RAPIDLY SOLIDIFIED Cu(100-x)Al13Mnx (x=1-14) RIBBONS", 2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC?17),, NEV艦EH陌R, T脺RKIYE, 11-13 Ekim 2017, pp.187-192

20.听 脰zt眉rk S., Ero臒lu M., S眉nb眉l S.E., G枚lba艧i Z., 陌cin K., 脰zt眉rk B., "Melt Spinning Y枚ntemiyle CuAlMn 艦eritlerin 脺retimi ve Manyetik 脰zelliklerinin 陌ncelenmesi", 2nd International Conference on Advanced Engineering Technologies (ICADET 2017), BAYBURT, T脺RKIYE, 21-23 Eyl眉l 2017, pp.0-0

21.听 脰zt眉rk S., 陌cin K., 脰zt眉rk B., Topal U. , "Magnetic Behaviours of Dendritically Solidified Spherical NdFeB Powders and Surfactant-Active Ball Milled Particles", 2nd International Conference on Advanced Engineering Technologies, BAYBURT, T脺RKIYE, 21-23 Ekim 2017, pp.1281-1293

22.听 脰zt眉rk S., 陌cin K., 脰zt眉rk B., Topal U. , Kaftelen Odaba艧谋 H., "Effect of Wheel Cooling on Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt Spinning Method", 4Th International Conference On Materials Science And Nanotechnology For Next Generation , Saraybosna, BOSNA HERSEK, 28-30 Haziran 2017, pp.63-63

23.听 脰zt眉rk B., 陌cin K., G枚lba艧i Z., 脰zt眉rk S., "Effect of Deformation Rate on Electrical and Mechanical Properties of Pure Copper", 2nd International Conference on Advanced Engineering Technologies, BAYBURT, T脺RKIYE, 21-23 Ekim 2017, pp.917-923

24.听 脰zt眉rk S., S眉nb眉l S.E., G枚lba艧i Z., 陌cin K., 脰zt眉rk B., "Production Of AA2024 Aluminum Alloy Ribbons By Melt Spinning Process", 2nd International Conference on Advanced Engineering Technologies (ICADET 2017), BAYBURT, T脺RKIYE, 21-23 Eyl眉l 2017, ss.0-0

25.听 脰zt眉rk B., G枚lba艧i Z., 脰zt眉rk S., "Effects of Tin on the Mechanical and Tribological Preoperties of Titanium-Based Implant Materials", 2nd International Conference on Advanced Engineering Technologies (ICADET 2017), BAYBURT, T脺RKIYE, 21-23 Eyl眉l 2017, pp.512-520

26.听 脺mit ALVER, Handan 脰ZL脺 TORUN, S眉leyman KERL陌, ?TIO2/DYE/CUI AND ZNO/DYE/CUI SENSITIZED SOLID-STATE SOLAR CELLS? Turkish Physical Society 33rd International Physics Congress, September 6-10, 2017, Bodrum /Turkey

27.听 Mustafa ASLAN ? The Effect of Reinforcement Content on the Mechanical and Physical Properties of the Polyester Based Carbon and Basalt Fibers Reinforced Composites? 2nd International Defense Industry Symposium, 6-8 Nisan (2017)听听听听听 K谋r谋kkale, Turkey Onur G脺LER,听 脺mit ALVER, E. Gazi KAYMAZ,

28.听 Mustafa ASLAN ?The Effect of Basalt Fiber听听听听听听听 Content on the Physical-Mechanical Properties of the Basalt Fiber Reinforced Polylactic Acid听 (PLA) Composites? 2nd International Defense Industry Symposium, 6-8 Nisan (2017)听听听听听 K谋r谋kkale, TurkeyOnur G脺LER,听 脺mit ALVER, Murat KAYA,

29.听 Mustafa ASLAN, Onur G脺LER, 听 ? Mechanical Performance听 of Laminar and Tubular Carbon Epoxy Prepreg Composites by Vacuum Bag Oven Method?听 2nd听 International Defense听 Industry Symposium, 6-8 Nisan (2017) K谋r谋kkale, Turkey,听 脺mit ALVERKutay CAVA

30.听 Mustafa ASLAN, Onur G脺LER, , Eda Y脺CELO臑LU ? An Investigation on the mechanical properties of the Sandwich听 Panel Composites? 2nd听 International Defense听 Industry Symposium, 6-8 Nisan (2017) K谋r谋kkale, Turkey,听 脺mit ALVERKutay CAVA

31.听 Mustafa ASLAN, 脺mit ALVER, Onur G眉ler, Kutay CAVA, ?Investigation of Effect of Layer Thickness and Fan Speed on Mechanical, Surface and Microscopic Properties of 3d Printed ABS Polymers? THE 2nd INTERNATIONAL SYMPOSIUM ON 3D PRINTING TECHNOLOGIES (3D-PTS2017), 3-4 April 2017, Istanbul, Turkey

32.听 Mustafa Aslan, 脺mit Alver, Onur Guler, ?Tensile Properties Of Carbon/Jute Woven Fibre Reinforced Polyester Composites? International Conference on Engineering Technology and Innovation (ICETI), Sarajevo, Bosnia and Herzegovina, page 129,听 (2017)

33.听 Mustafa Aslan, 脺mit Alver, Onur Guler, ? Mechanical Characterisation Of Glass/Flax Woven Fibre Reinforced Hybrid Composites? International Conference on Engineering Technology and Innovation (ICETI), Sarajevo, Bosnia and Herzegovina, page 128,听 (2017)

34.听 脺mit ALVER, Hamdullah 脟uvalc谋, Onur GULER, Fatih Erdemir, Dogancan Demir听 ?Effects of Nitrocarburizing on the Corrosion Behavior of AISI 4140 Steel? International听 Conference on Engineering Technology and Innovation (ICETI), Sarajevo, Bosnia and 听Herzegovina, page 125,听 (2017)

35.听 脺mit ALVER, Mustafa Aslan, Onur GULER, Mustafa Enis Tas?c谋oglu, ?Synthesis,听 Characterization and Optical Properties of the PMMA Based Nanocomposites? 听International Conference on Engineering Technology and Innovation (ICETI ), Sarajevo,听 Bosnia and Herzegovina , page 126, (2017)

36.听 Fatih Erdemir, The effect of process parameters on specific surface area of B4C powders in mechanical milling, 3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, 205-209.

37.听 ., "Corrosion Properties o f ZA27/ B4C Composites Fabri cated By Powder Metallurgy", 2nd International Conference on Advanced Engineering Technologies (ICADET 2017), BAYBURT, T脺RKIYE, 21-23 Eyl眉l 2017, pp.27-32.脟anak莽i A., 脟uvalci H., Erdemir FYal莽in E.D.,

38.听 Yal莽in E.D., 脟anak莽i A., 脟uvalci H., Erdemir F., 脟别濒别产颈 M., "Wear Resistance Of ZA27 Matrix Reinforced with Nanographene Particle", 4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, BOSNA HERSEK, 28-30 Haziran 2017, pp.347-352.

39.听 ., Yilmaz E., Ert眉rk S., Arslan C., "Investigating the Dissolution Characteristics of Strontium Sulfide", 3rd Pan American Materials Congress,, San Diego, ABD, 26 艦ubat - 3 Mart 2017, pp.539-545 Sezer RHizli 陌.G. , Bilen A.,

40.听 Ert眉rk S., Arslan C., "Strontium Carbonate Precipitation With Ammonium Carbonate From Strontium Sulphide Solution", XVIIth Balkan Mineral Processing Congress ? BMPC 2017, ANTALYA, T脺RKIYE, 1-3 Kas谋m 2017, pp.551-555 Sezer R.,Hizli 陌.G., Bilen A.,

41.听 Sezer R., Bilen A., Hizli 陌.G. , Ert眉rk S., Arslan C., "Direct Conversion of Celestite to SrCO3 by Wet Milling", TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings, San Diego, ABD, 26 艦ubat - 3 Mart 2017, pp.609-614

听

42.听 ., Ert眉rk S., Arslan C., "Strontium Carbonate Precipitation form Strontium Sulfide Solution", XVIIth Balkan Mineral Processing Congress ? BMPC 2017, ANTALYA, T脺RKIYE, 1-3 Kas谋m 2017, pp.543-550 Sezer RBilen A., Hizli 陌.G.,

43.听 ., Hizli 陌.G. , Bilen A., Arslan C., "Roasting of Celestite in Laboratory Scale Rotary Furnace", 8th International Symposium on High-Temperature Metallurgical Processing, San Diego, ABD, 26 艦ubat - 3 Mart 2017, pp.469-476 Sezer RErt眉rk S.,

44.听 Ert眉rk S., Arslan C., "Production of Strontianite from Celestite Ore in Carbonate Media", 3rd Pan American Materials Congress,, San Diego, ABD, 26 艦ubat - 3 Mart 2017, pp.607-613 Sezer R.,Hizli 陌.G. , Bilen A.,

45.听 A. Canakci, 脰.Y Keskin, S. 脰zkaya and M. 脟别濒别产颈,听 Production of Biomaterials by Powder Metallurgy Methods and Applications, 8th International Advanced Technologies Symposium, Ekim 2017,Elaz谋臒,Turkey.

46.听 A. Canakci, 脰.Y Keskin, S. 脰zkaya,听 Production of Aluminum foam with TiH2, , 8th International Advanced Technologies Symposium, Ekim 2017,Elaz谋臒,Turkey.

47.听 A.脟anak莽谋, 脰.Y.Keskin, S. 脰zkaya and M.脟别濒别产颈,听 Metal Foams Produced by Powder Metallurgy Methods and Applications, 8th International Advanced Technologies Symposium, Ekim 2017,Elaz谋臒,Turkey.

48.听 A.H. Karabacak, A. Canakci, S. Ozkaya, U. Cal谋gulu,听 Microstructure and Mechanical Properties of Al2024-B4C Nanocomposite Produced by Mechanical Alloying and Hot Pressing Method,听 8th International Advanced Technologies Symposium, Ekim 2017,Elaz谋臒,Turkey.

49.听听 脰zt眉rk B., ?Bonding Strength and Fuel Leakage Tests for Crofer庐R22 APU Solid Oxide Fuel Cell Interconnects? , International Hydrogen Technologies Congress (IHTEC 2017), ADANA, T脺RK陌YE, 15-18 Mart 2017., Cora 脰. N 脰zt眉rk S., Topcu A.,

听

50.听 G枚lba艧i Z., "Production of Porous Ti-6Al-XFe Alloy by Powder Metallurgy Method, Investigation of the Mechanical and Tribological Properties", 2nd International Energy & Engineering Conference 2017, GAZ陌ANTEP, T脺RKIYE, 12-13 Ekim 2017, pp.438-438

Y眉r眉t眉len ve Tamamlanan T脺B陌TAK, SAN-TEZ, Kamu Kurum ve Kurulu艧lar谋 Projeleri

1.听听听听听听 Sultan 脰zt眉rk, "Hibrit ve Elektrikli Ara莽lar 陌莽in Y眉ksek Performansl谋 Sert (Kal谋c谋) M谋knat谋slar谋n H谋zl谋 Kat谋la艧t谋rma Y枚ntemiyle 脺retimi ve 脰zelliklerinin Geli艧tirilmesi", T脺BITAK Projesi, 114M501, , 2017(tamamland谋).

听

2.听听听听听听 B眉lent 脰ZT脺RK, Kat谋 Oksit Yak谋t Pillerinde (KOYP) Kullan谋lan Metalik 陌nterkonnekt枚r Plakalar谋n Toz Metalurjisi (T/M) Y枚ntemiyle 脺retimi ve Performans De臒erlendirmeleri T脺B陌TAK Projesi, 114M502,2017 (tamamland谋)

听

Y眉r眉t眉len ve Tamamlanan 脺niversiteye Yap谋lan Projeler

1.听听听听听听 Sultan 脰zt眉rk, "Element Katk谋l谋 NdFeB Esasl谋 Sert M谋knat谋slar谋n 脺retimi ve 脰zelliklerinin 陌ncelenmesi", BAP Y.Lisans, FYL-2017-6931, Y眉r眉t眉c眉, Devam Ediyor

2.听听听听听听 Sultan 脰zt眉rk, "NdFeB ESASLI VE ELEMENT KATKILI Y脺KSEK PERFORMANSLI SERT MIKNATISLARIN MELT SPINNING Y脰NTEM陌 陌LE 脺RET陌M陌 VE 脰ZELL陌KLER陌N陌N 陌NCELENMES陌", BAP Di臒er, FBA-2017-5759, Y眉r眉t眉c眉, Devam Ediyor

听

3.听听听听听听 Sultan 脰zt眉rk, "Transformat枚rlerde Kullan谋lan Supermalloy Ala艧谋m谋n谋n Melt Spinning Y枚ntemi 陌le 脺retilmesi Ve 脰zelliklerinin 陌ncelenmesi", BAP Y.Lisans, FYL-2017-6796, Y眉r眉t眉c眉, Devam Ediyor

听

听

听

听

听

听

听

听

听

听

听

听

听

听

听

听

2018 Y谋l谋

2018 Y谋l谋nda B枚l眉m眉m眉zde 脺retilen Bilimsel 脟al谋艧malar

1. G眉ler, O., 脟uvalc谋, H., G枚kda臒, M., 脟anak莽i, A., 脟别濒别产颈, M.Tribological behavior of ZA27/Al2O3/graphite hybrid nanocomposites(2018) Particulate Science and Technology, 36 (7), pp. 899-907
2. Aslan, M., Tufan, M., K眉莽眉k枚mero臒lu, T.Tribological and mechanical performance of sisal-filled waste carbon and glass fibre hybrid composites(2018) Composites Part B: Engineering, 140, pp. 241-249.
3. Dalmis, R., Cuvalci, H., Canakci, A., Guler, O., Celik, E.The Effect of Mechanical Milling on Graphite?Boron Carbide Hybrid Reinforced ZA27 Nanocomposites(2018) Arabian Journal for Science and Engineering, 43 (3), pp. 1113-1124.
4. Yilmaz, S.S., Tutuncu, E., Misirlioglu, Y., Ku莽uk, A., Cuvalci, H., Aslan, M.Synthesis, charecterization of a new 16 A, S, C-HBPAE-b-PCL copolymers and the mechanical properties of the copolymer-cement composites(2018) Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering, art. no. 111.
5. Altintig, E., Onaran, M., Sar谋, A., Altundag, H., Tuzen, M.Preparation, characterization and evaluation of bio-based magnetic activated carbon for effective adsorption of malachite green from aqueous solution(2018) Materials Chemistry and Physics, 220, pp. 313-321.
6. Chopra, K., Tyagi, V.V., Pandey, A.K., Sari, A.Global advancement on experimental and thermal analysis of evacuated tube collector with and without heat pipe systems and possible applications(2018) Applied Energy, 228, pp. 351-389.
7. Ba臒da, E., Sar谋, A., Tuzen, M. Effective uranium biosorption by macrofungus (Russula sanguinea) from aqueous solution: equilibrium, thermodynamic and kinetic studies (2018) Journal of Radioanalytical and Nuclear Chemistry, 317 (3), pp. 1387-1397. 听
8. Bagda, E., Tuzen, M., Sari, A., Shemsi, A.M., Bukhari, A.A. Thermodynamics and kinetics of biosorption of vanadium with macrofungus (Hypholoma fasciculare) and determination by GFAAS(2018) Atomic Spectroscopy, 39 (4), pp. 170-177.
9. Sar谋, A., Bicer, A., Al-Ahmed, A., Al-Sulaiman, F.A., Zahir, M.H., Mohamed, S.A.Silica fume/capric acid-palmitic acid composite phase change material doped with CNTs for thermal energy storage(2018) Solar Energy Materials and Solar Cells, 179, pp. 353-361.
10. A., Tyagi, V.V., Anand, S., Pandey, A.K., Sari, A., Al-Sulaiman, F.A.Energy storage by PCM for building applications(2018) Handbook of Energy Systems in Green Buildings, pp. 995-1023.
11. 56f270b885ab299df6028d39085f83eaSar谋, A., Bicer, A., Al-Sulaiman, F.A., Karaipekli, A., Tyagi, V.V.Diatomite/CNTs/PEG composite PCMs with shape-stabilized and improved thermal conductivity: Preparation and thermal energy storage properties(2018) Energy and Buildings, 164, pp. 166-175.
12. Saleh, T.A., Tuzen, M., Sar谋, A.Polyamide magnetic palygorskite for the simultaneous removal of Hg(II) and methyl mercury; with factorial design analysis(2018) Journal of Environmental Management, 211, pp. 323-333.
13. Bozkurt, F., K枚se, C., Sar谋, A.An inverse approach for automatic segmentation of carotid and vertebral arteries in CTA(2018) Expert Systems with Applications, 93, pp. 358-375.
14. Bozkurt, F., K枚se, C., Sari, A.Comparison of seeded region growing and random walk methods for vessel and bone segmentation in CTA images(2018) 2017 10th International Conference on Electrical and Electronics Engineering, ELECO 2017, 2018-January, pp. 561-567.
15. Kahraman D枚臒眉艧c眉, D., K谋z谋l, 脟., Bi莽er, A., Sar谋, A., Alkan, C.Microencapsulated n-alkane eutectics in polystyrene for solar thermal applications(2018) Solar Energy, 160, pp. 32-42.
16. Tuzen, M., Sar谋, A., Saleh, T.A.Response surface optimization, kinetic and thermodynamic studies for effective removal of rhodamine B by magnetic AC/CeO2 nanocomposite(2018) Journal of Environmental Management, 206, pp. 170-177.
17. Parameshwaran, R., Sar谋, A., Jalaiah, N., Karunakaran, R.Applications of Thermal Analysis to the Study of Phase-Change Materials(2018) Handbook of Thermal Analysis and Calorimetry, 6, pp. 519-572.
18. Sar谋, A., Alkan, C., Bilgin, C., Bicer, A.Preparation, Characterization and Thermal Energy Storage Properties of Micro/Nano Encapsulated Phase Change Material with Acrylic-Based Polymer(2018) Polymer Science - Series B, 60 (1), pp. 58-68.
19. Sar谋, A., Bicer, A., Karaipekli, A., Al-Sulaiman, F.A.Preparation, characterization and thermal regulation performance of cement based-composite phase change material(2018) Solar Energy Materials and Solar Cells, 174, pp. 523-529.
20. Pandey, A.K., Hossain, M.S., Tyagi, V.V., Abd Rahim, N., Selvaraj, J.A.L., Sari, A.Novel approaches and recent developments on potential applications of phase change materials in solar energy(2018) Renewable and Sustainable Energy Reviews, 82, pp. 281-323
21. Varol, T., Canakci, A., Ozsahin, S., Erdemir, F., Ozkaya, S.Artificial neural network-based prediction technique for coating thickness in Fe-Al coatings fabricated by mechanical milling(2018) Particulate Science and Technology, 36 (6), pp. 742-750.
22. Varol, T., Canakci, A., Ozkaya, S., Erdemir, F.Determining the effect of flake matrix size and Al2O3 content on microstructure and mechanical properties of Al2O3 nanoparticle reinforced Al matrix composites(2018) Particulate Science and Technology, 36 (3), pp. 312-323.
23. Varol, T., Canakci, A., Ozsahin, S.Prediction of effect of reinforcement content, flake size and flake time on the density and hardness of flake AA2024-SiC nanocomposites using neural networks(2018) Journal of Alloys and Compounds, 739, pp. 1005-1014.
24. Aslan, M., Kaya, M., G眉ler, O., Alver, 脺.Effect of fibre content on the mechanical properties of basalt fibre reinforced polylactic acid (PLA) composites(2018) Tekstil ve Konfeksiyon, 28 (1), pp. 66-71.
25. 脰zt眉rk, S., 陌cin, K., 脰zt眉rk, B., Topal, U., Karaa臒a莽, 脰., K枚莽kar, H.The Role of Wheel Surface Quality on Structural and Hard Magnetic Properties of Nd?Fe?B Permanent Magnet Powders(2018) Journal of Superconductivity and Novel Magnetism, 31 (9), pp. 3025-3041.
26. 脰zt眉rk, B., Topcu, A., 脰zt眉rk, S., Cora, 脰.N.Oxidation, electrical and mechanical properties of Crofer庐22 solid oxide fuel cell metallic interconnects manufactured through powder metallurgy(2018) International Journal of Hydrogen Energy, 43 (23), pp. 10822-10833.

2019 Y谋l谋

2019 Y谋l谋nda B枚l眉m眉m眉zde 脺retilen Bilimsel 脟al谋艧malar

听

1. 脰zt眉rk, S., 陌cin, K., Gen莽t眉rk, M., G枚b眉l眉k, M., Topal, U., Svec, P.Surface and structural characterization of amorphous Fe,Co-based melt-spun ribbons subjected to heat treatment processes(2019) Journal of Non-Crystalline Solids, 522, art. no. 119592.
2. G眉ler, O., Erdemir, F., 脟别濒别产颈, M., 脟uvalc谋, H., 脟anak莽谋, A.Effect of nano alumina content on corrosion behavior and microstructure of Za27/graphite/alumina hybrid nanocomposites(2019) Results in Physics, 15, art. no. 102700.
3. Alver, 脺., Tasc谋o臒lu, M.E., G眉ler, O., Aslan, M., Yazgan, A., Kaya, H., Duran, C., 脟uvalc谋, H., Bilgin, S.Optical and Dielectric Properties of PMMA/?-Fe2O3?ZnO Nanocomposite Films(2019) Journal of Inorganic and Organometallic Polymers and Materials, 29 (5), pp. 1514-1522
4. Yal莽谋n, E.D., 脟anak莽谋, A., Erdemir, F., 脟uvalc谋, H., Karabacak, A.H.Enhancement of Wear and Corrosion Resistance of ZA27/Nanographene Composites Produced by Powder Metallurgy(2019) Arabian Journal for Science and Engineering, 44 (2), pp. 1437-1445.
5. Suresh Kumar, S., Uthayakumar, M., Thirumalai Kumaran, S., Varol, T., Canakci, A. Investigating the surface integrity of aluminium based composites machined by EDM(2019) Defence Technology, 15 (3), pp. 338-343.
6. Kahya, V., Karaca, S., Okur, F.Y., Altun谋艧谋k, A.C., Aslan, M.Free vibrations of laminated composite beams with multiple edge cracks: Numerical model and experimental validation(2019) International Journal of Mechanical Sciences, 159, pp. 30-42.
7. Kalusuraman, G., Thirumalai Kumaran, S., Aslan, M., K眉莽眉k枚mero臒luc, T., Siva, I.Use of waste copper slag filled jute fiber reinforced composites for effective erosion prevention(2019) Measurement: Journal of the International Measurement Confederation, 148, art. no. 106950.
8. Kalusuraman, G., Siva, I., Aslan, M., Anandkumar, S., Satyanarayana, K.G. Evaluation of surface pre-treatments on the surface characteristics modifications in sponge gourd (Luffa Cylindrica) fibers(2019) Materials Research Express, 6 (9), art. no. 095106.
9. Dalu, M., Temiz, A., Altunta艧, E., Demirel, G.K., Aslan, M.Characterization of tanalith E treated wood flour filled polylactic acid composites(2019) Polymer Testing, 76, pp. 376-384.
10. Kalusuraman, G., Thirumalai Kumaran, S., Aslan, M., Mayandi, K.Mechanical properties of waste copper slag filled surface activated jute fiber reinforced composite(2019) Materials Research Express, 6 (12), art. no. 125347.
11. Saleh, T.A., Sar谋, A., Tuzen, M.Carbon nanotubes grafted with poly(trimesoyl, m-phenylenediamine) for enhanced removal of phenol(2019) Journal of Environmental Management, 252, art. no. 109660.
12. T.A., Tuzen, M., Sari, A.Magnetic vermiculite-modified by poly(trimesoyl chloride-melamine) as a sorbent for enhanced removal of bisphenol A(2019) Journal of Environmental Chemical Engineering, 7 (6), art. no. 103436.
13. Ouikhalfan, M., Sari, A., Chehouani, H., Benhamou, B., Bi莽er, A.Preparation and characterization of nano-enhanced myristic acid using metal oxide nanoparticles for thermal energy storage(2019) International Journal of Energy Research, 43 (14), pp. 8592-8607.
14. K., Tyagi, V.V., Pathak, A.K., Pandey, A.K., Sari, A.Experimental performance evaluation of a novel designed phase change material integrated manifold heat pipe evacuated tube solar collector system(2019) Energy Conversion and Management, 198, art. no. 111896.
15. Sar谋, A., Al-Ahmed, A., Bicer, A., Al-Sulaiman, F.A., Hekimo臒lu, G. Investigation of thermal properties and enhanced energy storage/release performance of silica fume/myristic acid composite doped with carbon nanotubes(2019) Renewable Energy, 140, pp. 779-788.
16. A., Bi莽er, A., Hekimo臒lu, G.Effects of carbon nanotubes additive on thermal conductivity and thermal energy storage properties of a novel composite phase change material(2019) Journal of Composite Materials, 53 (21), pp. 2967-2980.
17. Sar谋, A., Bicer, A., Alkan, C., 脰zcan, A.N.Thermal energy storage characteristics of myristic acid-palmitic eutectic mixtures encapsulated in PMMA shell(2019) Solar Energy Materials and Solar Cells, 193, pp. 1-6.
18. Sar谋, A., Sharma, R.K., Hekimo臒lu, G., Tyagi, V.V.Preparation, characterization, thermal energy storage properties and temperature control performance of form-stabilized sepiolite based composite phase change materials(2019) Energy and Buildings, 188-189, pp. 111-119.
19. Sar谋, A., Bi莽er, A., Alkan, C.Poly(styrene-co-maleic anhydride)-graft-fatty acids as novel solid?solid PCMs for thermal energy storage(2019) Polymer Engineering and Science, 59 (s2), pp. E337-E347.
20. Sezer, R., Bilen, A., Yilmaz, E., Ert眉rk, S., Arslan, C.Investigation of leaching characteristics of celestite concentrate in acidic media and SrCO3 production via precipitation](2019) Journal of the Faculty of Engineering and Architecture of Gazi University, 34 (3), pp. 1409-1416.
21. Sezer, R., Yilmaz, E., Ert眉rk, S., Arslan, C.Calcination of Strontium Carbonate in Rotary Kiln Furnace(2019) Minerals, Metals and Materials Series, pp. 591-597.
22. Sezer, R., Arslan, C.Mechano-chemical conversion of celestite in highly concentrated sodium carbonate media(2019) Physicochemical Problems of Mineral Processing, 55 (2), pp. 324-335.
23. G眉ler, O., Varol, T., Alver, 脺., 脟anak莽谋, A. The effect of flake-like morphology on the coating properties of silver coated copper particles fabricated by electroless plating (2019) Journal of Alloys and Compounds, 782, pp. 679-688.
24. Varol, T., Ozsahin, S.Artificial neural network analysis of the effect of matrix size and milling time on the properties of flake Al-Cu-Mg alloy particles synthesized by ball milling(2019) Particulate Science and Technology, 37 (3), pp. 381-390.
25. Yal莽谋n, E.D., 脟anak莽谋, A., Erdemir, F., 脟uvalc谋, H., Karabacak, A.H. Enhancement of Wear and Corrosion Resistance of ZA27/Nanographene Composites Produced by Powder Metallurgy(2019) Arabian Journal for Science and Engineering, 44 (2), pp. 1437-1445.
26. Reddy, N.C., Koppad, P.G., Reddappa, H.N., Ramesh, M.R., Babu, E.R., Varol, T.Hot corrosion behaviour of HVOF sprayed Ni3Ti and Ni3Ti + (Cr3C2 + 20NiCr) coatings in presence of Na2SO4-40%V2O5 at 650 掳c(2019) Surface Topography: Metrology and Properties, 7 (2), art. no. 025019, .
27. Alver, U., Kudret, A., Kerli, S. Effect of Ethanol on the Photovoltaic Performance of ZnO Based Dye Sensitized Solar Cells(2019) Crystallography Reports, 64 (7), pp. 1159-1164.
28. Kerli, S., Alver, 脺., Eskalen, H., Uru艧, S., So臒uksu, A.K. Structural and Morphological Properties of Boron Doped V 2 O 5 Thin Films: Highly Efficient Photocatalytic Degradation of Methyl Blue(2019) Russian Journal of Applied Chemistry, 92 (2), pp. 304-309.
29. Kerli, S., Alver, 脺., Eskalen, H., So臒uksu, A.K.Electrochemical properties and photocatalytic activity of In2O3-Co3O4 thin films(2019) Comptes Rendus de L'Academie Bulgare des Sciences, 72 (3), pp. 327-332.

2020 Y谋l谋

2020 Y谋l谋nda B枚l眉m眉m眉zde 脺retilen Bilimsel 脟al谋艧malar

听

1. G眉ler, O., 脟eleb谋, M., Dalm谋艧, R., 脟anak莽i, A., 脟uvalci, H.Novel ZA27/B4C/Graphite Hybrid Nanocomposite-Bearing Materials with Enhanced Wear and Corrosion Resistance(2020) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (9), pp. 4632-4646.
2. Ayar, M.K., Guven, M.E., Burduroglu, H.D., Erdemir, F.Repair of aged bulk-fill composite with posterior composite: Effect of different surface treatments(2019) Journal of Esthetic and Restorative Dentistry, 31 (3), pp. 246-252.
3. 听Ayar, M.K.,Erdemir,F. Effect of operating light exposure on enamel bonding performances of universal adhesives(2020) Medziagotyra, 26 (3), pp. 352-357.
4. Canakc谋, A., Ozkaya, S., Erdemir, F., Karabacak, A.H., Celebi, M.Effects of Fe?Al intermetallic compounds on the wear and corrosion performances of AA2024/316L SS metal/metal composites(2020) Journal of Alloys and Compounds, 845, art. no. 156236.
5. Yal莽in, E.D., 脟anak莽i, A.Corrosion and wear performance of ZA27/graphene/B4C hybrid nanocomposites produced by powder metallurgy(2020) Acta Metallurgica Slovaca, 26 (3), pp. 126-131.
6. Yilmaz, N., Baltaci, E., Baygin, O., T眉z眉ner, T., Ozkaya, S., Canakci, A.Effect of the usage of Er,Cr:YSGG laser with and without different remineralization agents on the enamel erosion of primary teeth(2020) Lasers in Medical Science, 35 (7), pp. 1607-1620.
7. G眉ler, O., Varol, T., Alver, 脺., Canakci, A.Effect of Al2O3 content and milling time on the properties of silver coated Cu matrix composites fabricated by electroless plating and hot pressing(2020) Materials Today Communications, 24, art. no. 101153.
8. Kumar, S.S., Erdemir, F., Varol, T., Kumaran, S.T., Uthayakumar, M., Canakci, A.Investigation of WEDM process parameters of Al?SiC?B4C composites using response surface methodology(2020) International Journal of Lightweight Materials and Manufacture, 3 (2), pp. 127-135.
9. Karabacak, A.H., 脟anak莽谋, A., Erdemir, F., 脰zkaya, S., 脟别濒别产颈, M.Effect of different reinforcement on the microstructure and mechanical properties of AA2024-based metal matrix nanocomposites(2020) International Journal of Materials Research, 111 (5), pp. 416-423.
10. Al-Ahmed, A., Sar谋, A., Mazumder, M.A.J., Salhi, B., Hekimo臒lu, G., Al-Sulaiman, F.A., InamuddinThermal energy storage and thermal conductivity properties of fatty acid/fatty acid-grafted-CNTs and fatty acid/CNTs as novel composite phase change materials(2020) Scientific Reports, 10 (1), art. no. 15388.
11. Al-Ahmed, A., Sar谋, A., Mazumder, M.A.J., Hekimo臒lu, G., Al-Sulaiman, F.A., InamuddinThermal energy storage and thermal conductivity properties of Octadecanol-MWCNT composite PCMs as promising organic heat storage materials(2020) Scientific Reports, 10 (1), art. no. 9168.
12. Sahin, G., Aslan, A., Tuzen, M., Sar谋, A.Removal of Cr ions from aquatic solutions using olive leaves as low-cost bio-sorbent(2020) Atomic Spectroscopy, 41 (6), pp. 256-262.
13. Sar谋, A., Tyagi, V.V. Thermal energy storage properties and lab-scale thermal performance in cementitious plaster of composite phase change material for energy efficiency of buildings(2020) Environmental Progress and Sustainable Energy, 39 (6), art. no. e13455.
14. Tuzen, M., Sar谋, A., Saleh, T.A.Synthesis, characterization and evaluation of carbon nanofiber modified-polymer for ultra-removal of thorium ions from aquatic media(2020) Chemical Engineering Research and Design, 163, pp. 76-84.
15. Bozkurt, F., K枚se, C., Sar谋, A.A texture-based 3D region growing approach for segmentation of ICA through the skull base in CTA(2020) Multimedia Tools and Applications, 79 (43-44), pp. 33253-33278.
16. Temiz, A., Hekimo臒lu, G., K枚se Demirel, G., Sar谋, A., Mohamad Amini, M.H.Phase change material impregnated wood for passive thermal management of timber buildings(2020) International Journal of Energy Research, 44 (13), pp. 10495-10505.
17. Deka, P.P., Ansu, A.K., Sharma, R.K., Tyagi, V.V., Sar谋, A.Development and characterization of form-stable porous TiO2/tetradecanoic acid based composite PCM with long-term stability as solar thermal energy storage material(2020) International Journal of Energy Research, 44 (13), pp. 10044-10057.
18. Sar谋, A., Hekimo臒lu, G., Tyagi, V.V., Sharma, R.K.Evaluation of pumice for development of low-cost and energy-efficient composite phase change materials and lab-scale thermoregulation performances of its cementitious plasters(2020) Energy, 207, art. no. 118242.
19. Naeemullah, Tuzen, M., Sar谋, A., Turkekul, I.Influential bio-removal of mercury using Lactarius acerrimus macrofungus as novel low-cost biosorbent from aqueous solution: Isotherm modeling, kinetic and thermodynamic investigations(2020) Materials Chemistry and Physics, 249, art. no. 123168.
20. Tuzen, M., Saleh, T.A., Sar谋, A., NaeemullahInterfacial polymerization of trimesoyl chloride with melamine and palygorskite for efficient uranium ions ultra-removal(2020) Chemical Engineering Research and Design, 159, pp. 353-361.
21. Saleh, T.A., Al-Ruwayshid, S.H., Sar谋, A., Tuzen, M.Synthesis of silica nanoparticles grafted with copolymer of acrylic acrylamide for ultra-removal of methylene blue from aquatic solutions(2020) European Polymer Journal, 130, art. no. 109698.
22. Chopra, K., Tyagi, V.V., Pandey, A.K., Sharma, R.K., Sari, A.PCM integrated glass in glass tube solar collector for low and medium temperature applications: Thermodynamic & techno-economic approach(2020) Energy, 198, art. no. 117238.
23. Sar谋, A., Ouikhalfan, M., Chehouani, H., Hekimo臒lu, G., Bicer, A., Al-Ahmed, A., Al-Sulaiman, F.A., Tyagi, V.V.Form-Stabilized Polyethylene Glycol/Palygorskite Composite Phase Change Material: Thermal Energy Storage Properties, Cycling Stability, and Thermal Durability(2020) Polymer Engineering and Science, 60 (5), pp. 909-916.
24. Sar谋, A., Bi莽er, A., Alkan, C.Thermal energy storage properties of polyethylene glycol grafted styrenic copolymer as novel solid-solid phase change materials(2020) International Journal of Energy Research, 44 (5), pp. 3976-3989.
25. Sar谋, A., Hekimo臒lu, G., Tyagi, V.V.Low cost and eco-friendly wood fiber-based composite phase change material: Development, characterization and lab-scale thermoregulation performance for thermal energy storage(2020) Energy, 195, art. no. 116983.
26. Ansu, A.K., Sharma, R.K., Tyagi, V.V., Sar谋, A., Ganesan, P., Tripathi, D.A cycling study for reliability, chemical stability and thermal durability of polyethylene glycols of molecular weight 2000 and 10000 as organic latent heat thermal energy storage materials(2020) International Journal of Energy Research, 44 (3), pp. 2183-2195.
27. Ouikhalfan, M., Labihi, A., Belaqziz, M., Chehouani, H., Benhamou, B., Sar谋, A., Belfkira, A.Stability and thermal conductivity enhancement of aqueous nanofluid based on surfactant-modified TiO2(2020) Journal of Dispersion Science and Technology, 41 (3), pp. 374-382.
28. Sar谋, A., Saleh, T.A., Hekimo臒lu, G., Tuzen, M., Tyagi, V.V.Evaluation of carbonized waste tire for development of novel shape stabilized composite phase change material for thermal energy storage(2020) Waste Management, 103, pp. 352-360.
29. Chopra, K., Pathak, A.K., Tyagi, V.V., Pandey, A.K., Anand, S., Sari, A.Thermal performance of phase change material integrated heat pipe evacuated tube solar collector system: An experimental assessment(2020) Energy Conversion and Management, 203, art. no. 112205, .
30. Erdemir, F., Varol, T., 脟anak莽i, A.Synthesis of SiC nanoparticles by central composite design response surface methodology directed mechanical milling(2020) Micro and Nano Letters, 15 (3), pp. 189-192.
31. 听Sezer, R., H谋zl谋, G., Bilen, A., Ert眉rk, S., D谋艧p谋nar, D., Arslan, C.Metallothermic Production of Aluminum?Strontium Master Alloy for Modification of Silicon(2020) Metallography, Microstructure, and Analysis, 9 (6), pp. 833-840.
32. Sezer, R., Bilen, A., H谋zl谋, G., Ert眉rk, S., Arslan, C.Effects of Furnace Slope and Rotational Speed on the Carbothermic Reduction of Celestite in a Laboratory-Scale Rotary Kiln Furnace(2020) Mining, Metallurgy and Exploration, 37 (4), pp. 1273-1278.
33. T眉rk, T., Alp, 陌., Sezer, R., Arslan, C.Removal of arsenic from water using copper slag(2020) Journal of the Southern African Institute of Mining and Metallurgy, 120 (5), pp. 313-318.
34. 脰zen, 陌., 脟ava, K., Gedikli, H., Alver, 脺., Aslan, M.Low-energy impact response of composite sandwich panels with thermoplastic honeycomb and reentrant cores(2020) Thin-Walled Structures, 156, art. no. 106989.
35. G眉ler, O., Alver, 脺., Varol, T.Fabrication and characterization of novel layered materials produced by electroless plating and hot pressing(2020) Journal of Alloys and Compounds, 835, art. no. 155278.
36. John, K.M., Kumaran, S.T., Senthil Kumar, K., Suresh Kumar, S., Aslan, M., Alver, 脺.听 Mechanical and vibrational behavior of twill woven carbon fiber reinforced composites(2020) International Polymer Processing, 35 (2), pp. 203-210.
37. Kerli, S., Alver, U., G枚臒ebakan, M. Investigation of the Electrical Properties of Al85Y9Ni6 Metallic Glass and Formulation of the Results(2020) Glass Physics and Chemistry, 46 (2), pp. 189-193.
38. 脰zt眉rk, B., Gedikli, H., K谋l谋莽arslan, Y.S.Erosive wear characteristics of E-glass fiber reinforced silica fume and zinc oxide-filled epoxy resin composites(2020) Polymer Composites, 41 (1), pp. 326-337.
39. 听脰zt眉rk, S., S眉nb眉l, S.E., Meto臒lu, A., 脰nal, S., 陌莽in, K.Characterisation of nickel?aluminium bronze powders produced by the planar flow casting method(2020) Materials Science and Technology (United Kingdom), 36 (16), pp. 1771-1784.
40. 脰zt眉rk, S., S眉nb眉l, S.E., Meto臒lu, A., 陌脟陌N, K.Improvement of microstructure, tribology and corrosion characteristics of nickel-aluminum bronze by P/M method(2020) Tribology International, 151, art. no. 106519.
41. S眉nb眉l, S.E., 脰zt眉rk, S., 陌莽in, K.Structural and Hydrogen Storage Properties of Mg60-Ni40 and Mg80-Ni20 Alloys Prepared by Planar Flow Casting(2020) Journal of Materials Engineering and Performance, 29 (9), pp. 6101-6107.
42. 陌莽i?n, K., 脰zt眉rk, S., 脟akil, D.D., S眉nb眉l, S.E.Effect of the stoichiometric ratio on phase evolution and magnetic properties of SrFe12O19 produced with mechanochemical process using mill scale(2020) Ceramics International, 46 (9), pp. 14150-14160.
43. Aslan, M., Kaymaz, E.G.Characterization of thick carbon/basalt hybrid fiber polyester composites with graphene nanoplatelets(2020) Materialpruefung/Materials Testing, 62 (1), pp. 12-18.
44. 脰ZT脺RK, S., S脺NB脺L, S.E., 陌C陌N, K.Effects of melt spinning process parameters and wheel surface quality on production of 6060 aluminum alloy powders and ribbons(2020) Transactions of Nonferrous Metals Society of China (English Edition), 30 (5), pp. 1169-1182.
45. 脰zt眉rk, S., 陌莽in, K., Gen莽t眉rk, M., G枚b眉l眉k, M., Svec, P.Effect of heat treatment process on the structural and soft magnetic properties of Fe38Co38Mo8B15Cu ribbons(2020) Journal of Non-Crystalline Solids, 527, art. no. 119745.

2021 Y谋l谋

2021 Y谋l谋nda B枚l眉m眉m眉zde 脺retilen Bilimsel 脟al谋艧malar

听

1. 脟别濒别产颈, M., G眉ler, O., 脟anak莽谋, A., 脟uvalc谋, H.The effect of nanoparticle content on the microstructure and mechanical properties of ZA27-Al2O3-Gr hybrid nanocomposites produced by powder metallurgy(2021) Journal of Composite Materials, 55 (24), pp. 3395-3408.
2. Erdemir, F., G眉ler, O., 脟anak莽谋, A.Electroless nickel-phosphorus coated expanded graphite paper: Binder-free, ultra-thin, and low-cost electrodes for high-performance supercapacitors(2021) Journal of Energy Storage, 44, art. no. 103364, .
3. 脟evik, Z.A., Karabacak, A.H., K枚k, M., Canak莽谋, A., Kumar, S.S., Varol, T.The effect of machining processes on the physical and surface characteristics of AA2024-B4C-SiC hybrid nanocomposites fabricated by hot pressing method(2021) Journal of Composite Materials, 55 (19), pp. 2657-2671.
4. Kumar, S.S., Varol, T., Canakci, A., Kumaran, S.T., Uthayakumar, M. A review on the performance of the materials by surface modification through EDM(2021) International Journal of Lightweight Materials and Manufacture, 4 (1), pp. 127-144.
5. Kahya, V., Okur, F.Y., Karaca, S., Altun谋艧谋k, A.C., Aslan, M.Multiple damage detection in laminated composite beams using automated model update(2021) Structures, 34, pp. 1665-1683.
6. Kahya, V., Karaca, S., Okur, F.Y., Altun谋艧谋k, A.C., Aslan, M.Damage Localization in Laminated Composite Beams with Multiple Edge Cracks Based on Vibration Measurements(2021) Iranian Journal of Science and Technology - Transactions of Civil Engineering, 45 (1), pp. 75-87.
7. Sar谋, A., Saleh, T.A., Tuzen, M.Development and characterization of polymer-modified vermiculite composite as novel highly-efficient adsorbent for water treatment(2021) Surfaces and Interfaces, 27, art. no. 101504.
8. Gencel, O., Hekimo臒lu, G., Sar谋, A., Sutcu, M., Er, Y., Ustaoglu, A.A novel energy-effective and carbon-emission reducing mortars with bottom ash and phase change material: Physico-mechanical and thermal energy storage characteristics(2021) Journal of Energy Storage, 44, art. no. 103325.
9. Hekimo臒lu, G., Sar谋, A., Arunachalam, S., Arslano臒lu, H., Gencel, O.Porous biochar/heptadecane composite phase change material with leak-proof, high thermal energy storage capacity and enhanced thermal conductivity(2021) Powder Technology, 394, pp. 1017-1025.
10. Singh, H.M., Tyagi, V.V., Kothari, R., Azam, R., Khare, P., Sari, A.Novel approach for harvesting of microalgal biomass using electric geyser waste material deposit as flocculant in coupling with poultry excreta leachate(2021) Bioresource Technology, 341, art. no. 125646.
11. Gencel, O., Sar谋, A., Ustaoglu, A., Hekimoglu, G., Erdogmus, E., Yaras, A., Sutcu, M., Cay, V.V.Eco-friendly building materials containing micronized expanded vermiculite and phase change material for solar based thermo-regulation applications(2021) Construction and Building Materials, 308, art. no. 125062.
12. Saleh, T.A., Sar谋, A., Tuzen, M.Development and characterization of bentonite-gum arabic composite as novel highly-efficient adsorbent to remove thorium ions from aqueous media(2021) Cellulose, 28 (16), pp. 10321-10333.
13. Singh, G., Tyagi, V.V., Chopra, K., Pandey, A.K., Sharma, R.K., Sari, A. Correction to: Energetic and exergetic assessment of two- and three-stage spray drying units for milk processing industry (Journal of the Brazilian Society of Mechanical Sciences and Engineering, (2021), 43, 7, (359), 10.1007/s40430-021-03015-3)(2021) Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43 (10), art. no. 450.
14. Tyagi, V.V., Chopra, K., Kalidasan, B., Chauhan, A., Stritih, U., Anand, S., Pandey, A.K., Sar谋, A., Kothari, R.Phase change material based advance solar thermal energy storage systems for building heating and cooling applications: A prospective research approach(2021) Sustainable Energy Technologies and Assessments, 47, art. no. 101318.
15. Saleh, T.A., Tuzen, M., Sar谋, A.Evaluation of poly(ethylene diamine-trimesoyl chloride)-modified diatomite as efficient adsorbent for removal of rhodamine B from wastewater samples(2021) Environmental Science and Pollution Research, 28 (39), pp. 55655-55666.
16. Singh, G., Tyagi, V.V., Chopra, K., Pandey, A.K., Sharma, R.K., Sari, A.Energetic and exergetic assessment of two- and three-stage spray drying units for milk processing industry(2021) Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43 (7), art. no. 359.
17. D枚臒眉艧c眉, D.K., Hekimo臒lu, G., Sar谋, A.High internal phase emulsion templated-polystyrene/carbon nano fiber/hexadecanol composites phase change materials for thermal management applications(2021) Journal of Energy Storage, 39, art. no. 102674.
18. Hekimo臒lu, G., Sar谋, A., Kar, T., Kele艧, S., Kaygusuz, K., Y谋ld谋r谋m, N., Tyagi, V.V., Sharma, R.K., Saleh, T.A.Carbonized waste hazelnut wood-based shape-stable composite phase change materials for thermal management implementations(2021) International Journal of Energy Research, 45 (7), pp. 10271-10284.
19. Ahmad, S., Kothari, R., Singh, H.M., Tyagi, V.V., Singh, B., Sari, A.Experimental investigation of microalgal harvesting with low cost bottom ash: Influence of temperature and pH with zeta potential and thermodynamic function(2021) Environmental Technology and Innovation, 22, art. no. 101376.
20. Singh, P., Sharma, R.K., Ansu, A.K., Goyal, R., Sar谋, A., Tyagi, V.V.A comprehensive review on development of eutectic organic phase change materials and their composites for low and medium range thermal energy storage applications(2021) Solar Energy Materials and Solar Cells, 223, art. no. 110955.
21. Sar谋, A., Saleh, T.A., Hekimo臒lu, G., Tyagi, V.V., Sharma, R.K.Microencapsulated heptadecane with calcium carbonate as thermal conductivity-enhanced phase change material for thermal energy storage(2021) Journal of Molecular Liquids, 328, art. no. 115508.
22. Hekimo臒lu, G., Nas, M., Ouikhalfan, M., Sar谋, A., Tyagi, V.V., Sharma, R.K., Kurbetci, Saleh, T.A.Silica fume/capric acid-stearic acid PCM included-cementitious composite for thermal controlling of buildings: Thermal energy storage and mechanical properties(2021) Energy, 219, art. no. 119588.
23. Hekimo臒lu, G., Nas, M., Ouikhalfan, M., Sar谋, A., Kurbetci, 艦., Tyagi, V.V., Sharma, R.K., Saleh, T.A.Thermal management performance and mechanical properties of a novel cementitious composite containing fly ash/lauric acid-myristic acid as form-stable phase change material(2021) Construction and Building Materials, 274, art. no. 122105.
24. Al-Ahmed, A., Mazumder, M.A.J., Salhi, B., Sari, A., Afzaal, M., Al-Sulaiman, F.A.Effects of carbon-based fillers on thermal properties of fatty acids and their eutectics as phase change materials used for thermal energy storage: A Review(2021) Journal of Energy Storage, 35, art. no. 102329.
25. Hekimo臒lu, G., Sar谋, A., Kar, T., Kele艧, S., Kaygusuz, K., Tyagi, V.V., Sharma, R.K., Al-Ahmed, A., Al-Sulaiman, F.A., Saleh, T.A.Walnut shell derived bio-carbon/methyl palmitate as novel composite phase change material with enhanced thermal energy storage properties(2021) Journal of Energy Storage, 35, art. no. 102288.
26. Alt谋nt谋g, E., Yenigun, M., Sar谋, A., Altundag, H., Tuzen, M., Saleh, T.A.Facile synthesis of zinc oxide nanoparticles loaded activated carbon as an eco-friendly adsorbent for ultra-removal of malachite green from water(2021) Environmental Technology and Innovation, 21, art. no. 101305.
27. Ahmad, S., Kothari, R., Pathak, V.V., Tyagi, V.V., Pandey, A.K., Sari, A.Response surface methodology?based extraction optimization with application of ZrCl4 as novel quenching agent for enhancement of bio-oil yield from Jatropha curcas and Chlorella pyrenoidosa(2021) Biomass Conversion and Biorefinery.
28. Erdemir, F., Tuzcu, E., Bilgin, S., Alver, 脺., 脟anak莽谋, A.Influence of fluorine doping of zinc oxide on its electrochemical performance in supercapacitors(2021) Materials Chemistry and Physics, 259, art. no. 124033.
29. Bilgin, S., G眉ler, O., Alver, 脺., Erdemir, F., Aslan, M., 脟anak莽谋, A.Effect of TiN, TiAlCN, AlCrN, and AlTiN ceramic coatings on corrosion behavior of tungsten carbide tool(2021) Journal of the Australian Ceramic Society, 57 (1), pp. 263-273.
30. G眉ler, O., Varol, T., Alver, 脺., Biyik, S.The wear and arc erosion behavior of novel copper based functionally graded electrical contact materials fabricated by hot pressing assisted electroless plating(2021) Advanced Powder Technology, 32 (8), pp. 2873-2890.
31. G眉ler, O., Varol, T., Alver, 脺., Kaya, G., Y谋ld谋z, F.Microstructure and wear characterization of Al2O3 reinforced silver coated copper matrix composites by electroless plating and hot pressing methods(2021) Materials Today Communications, 27, art. no. 102205.
32. 脰zt眉rk, B., Topcu, A., Cora, 脰.N.Influence of processing parameters on the porosity, thermal expansion, and oxidation behavior of consolidated Fe22Cr stainless steel powder(2021) Powder Technology, 382, pp. 199-207.
33. 脰zen, 陌., Gedikli, H., 脰zt眉rk, B.Improvement of solid particle erosion resistance of helicopter rotor blade with hybrid composite shield(2021) Engineering Failure Analysis, 121, art. no. 105175.
34. Varol, T., G眉ler, O., Ak莽ay, S.B., Aksa, H.C.The effect of silver coated copper particle content on the properties of novel Cu-Ag alloys prepared by hot pressing method(2021) Powder Technology, 384, pp. 236-246.
35. I莽in, K., 脰zt眉rk, S., S眉nb眉l, S.E.Investigation and characterization of high purity and nano-sized SrCO3 production by mechanochemical synthesis process(2021) Ceramics International, 47 (23), pp. 33897-33911.
36. Varol, T., Hac谋saliho臒lu, 陌., Kaya, G., G眉ler, O., Y谋ld谋z, F., Aksa, H.C., Ak莽ay, S.B.The Effect of Selective Laser Melting Process on the Microstructure, Density, and Electrical Conductivity of Silver-Coated Copper Cores(2021) Journal of Materials Engineering and Performance, 30 (7), pp. 5216-5226.
37. 陌脟陌N, K., 脰ZT脺RK, S., 脟AKIL, D.D., S脺NB脺L, S.E.Mechanochemical synthesis of SrFe12O19 from recycled mill scale: Effect of synthesis time on phase formation and magnetic properties(2021) Journal of Alloys and Compounds, 873, art. no. 159787.
38. S眉nb眉l, S.E., 陌莽i?n, K., 艦eren, F.Z., 艦ahin, 脰., 脟akil, D.D., Sezer, R., 脰zt眉rk, S. Determination of structural, tribological, isothermal oxidation and corrosion properties of Al?Co?Cr?Fe?Ni?Ti?Cu high-entropy alloy(2021) Vacuum, 187, art. no. 110072.

听

2022 Y谋l谋

2022 Y谋l谋nda B枚l眉m眉m眉zde 脺retilen Bilimsel 脟al谋艧malar

听

1. Topcu, A., 脰zt眉rk, B., Cora, 脰.N.Performance evaluation of machined and powder metallurgically fabricated Crofer庐22 APU interconnects for SOFC applications(2022) International Journal of Hydrogen Energy, 47 (5), pp. 3437-3448.
2. Kocaman, M., 脟uvalc谋, H., G眉ler, O.Novel Flame-retarded Novolac Matrix Hybrid Composites with Graphite Particles and Glass Fiber Reinforcement(2022) Fibers and Polymers, 23 (7), pp. 2017-2029.
3. Kocaman, M., 脟uvalc谋, H.The evolution of tribological properties of graphite and glass fiber reinforced novolac matrix hybrid composites(2022) Polymer Composites,
4. Karabacak, A.H., 脟anak莽谋, A., Erdemir, F., 脰zkaya, S., 脟别濒别产颈, M.Corrosion and Mechanical Properties of Novel AA2024 Matrix Hybrid Nanocomposites Reinforced with B4C and SiC Particles(2022) Silicon, 14 (14), pp. 8567-8579.
5. Canpolat, 脰., 脟anak莽谋, A., Erdemir, F.Evaluation of microstructure, mechanical, and corrosion properties of SS316L/Al2O3 composites produced by hot pressing(2022) Materials Chemistry and Physics, 280, art. no. 125826.
6. 听Singh, P., Sharma, R.K., Goyal, R., Hekimo臒lu, G., Sar谋, A., Rathore, P.K.S., Tyagi, V.V.Development and characterization a novel leakage-proof form stable composite of graphitic carbon nitride and fatty alcohol for thermal energy storage(2022) Journal of Energy Storage, 55, art. no. 105761.
7. Yaras, A., Ustaoglu, A., Gencel, O., Sar谋, A., Hekimo臒lu, G., Sutcu, M., Erdogmus, E., Kaplan, G., Bayraktar, O.Y.Characteristics, energy saving and carbon emission reduction potential of gypsum wallboard containing phase change material(2022) Journal of Energy Storage, 55, art. no. 105685.
8. Gencel, O., Sar谋, A., Kaplan, G., Ustaoglu, A., Hekimo臒lu, G., Bayraktar, O.Y., Ozbakkaloglu, T.Properties of eco-friendly foam concrete containing PCM impregnated rice husk ash for thermal management of buildings(2022) Journal of Building Engineering, 58, art. no. 104961.
9. Gencel, O., Subasi, S., Ustaoglu, A., Sar谋, A., Marasli, M., Hekimo臒lu, G., Kam, E.Development, characterization and thermo-regulative performance of microencapsulated phase change material included-glass fiber reinforced foam concrete as novel thermal energy effective-building material(2022) Energy, 257, art. no. 124786.
10. Singh, P., Sharma, R.K., Khalid, M., Goyal, R., Sar谋, A., Tyagi, V.V.Evaluation of carbon based-supporting materials for developing form-stable organic phase change materials for thermal energy storage: A review(2022) Solar Energy Materials and Solar Cells, 246, art. no. 111896.
11. Gencel, O., Balci, B., Bayraktar, O.Y., Nodehi, M., Sar谋, A., Kaplan, G., Hekimo臒lu, G., Gholampour, A., Benli, A., Ozbakkaloglu, T.The effect of limestone and bottom ash sand with recycled fine aggregate in foam concrete(2022) Journal of Building Engineering, 54, art. no. 104689.
12. Ouikhalfan, M., Sar谋, A., Hekimo臒lu, G., Gencel, O., Tyagi, V.V.Thermal energy storage properties, thermal conductivity, chemical/and thermal reliability of three different organic phase change materials doped with hexagonal boron nitride(2022) Surfaces and Interfaces, 32, art. no. 102176.
13. Saleh, T.A., Tuzen, M., Sar谋, A.Effective antimony removal from wastewaters using polymer modified sepiolite: Isotherm kinetic and thermodynamic analysis(2022) Chemical Engineering Research and Design, 184, pp. 215-223.
14. Singh, G., Tyagi, V.V., Pandey, A.K., Goel, V., Sari, A.Comparative exergoeconomic analysis of single, two and three stage spray drying systems(2022) Journal of Thermal Analysis and Calorimetry, 147 (16), pp. 8947-8968.
15. Gencel, O., Hekimoglu, G., Sar谋, A., Ustaoglu, A., Subasi, S., Marasli, M., Erdogmus, E., Memon, S.A.Glass fiber reinforced gypsum composites with microencapsulated PCM as novel building thermal energy storage material(2022) Construction and Building Materials, 340, art. no. 127788.
16. G枚ksu, H., Ayd谋nl谋, E., Hekimo臒lu, G., Sar谋, A., Gencel, O., Suba艧谋, S., Tozluo臒lu, A.Activated carbon nanotube/polyacrylic acid/stearyl alcohol nanocomposites as thermal energy storage effective shape-stabilized phase change materials(2022) Surfaces and Interfaces, 31, art. no. 102088.
17. Saleh, T.A., Tuzen, M., Sar谋, A., Altunay, N.Factorial design, physical studies and rapid arsenic adsorption using newly prepared polymer modified perlite adsorbent(2022) Chemical Engineering Research and Design, 183, pp. 181-191.
18. Ahmad, S., Iqbal, K., Kothari, R., Singh, H.M., Sari, A., Tyagi, V.V.A critical overview of upstream cultivation and downstream processing of algae-based biofuels: Opportunity, technological barriers and future perspective(2022) Journal of Biotechnology, 351, pp. 74-98.
19. Gencel, O., Nodehi, M., Hekimo臒lu, G., Ustao臒lu, A., Sar谋, A., Kaplan, G., Bayraktar, O.Y., Sutcu, M., Ozbakkaloglu, T.Foam Concrete Produced with Recycled Concrete Powder and Phase Change Materials(2022) Sustainability (Switzerland), 14 (12), art. no. 7458.
20. Sar谋, A., Hekimo臒lu, G., Karabay谋r, Y., Sharma, R.K., Arslano臒lu, H., Gencel, O., Tyagi, V.V.Capric-stearic acid mixture impregnated carbonized waste sugar beet pulp as leak-resistive composite phase change material with effective thermal conductivity and thermal energy storage performance(2022) Energy, 247, art. no. 123501.
21. Harja, M., Gencel, O., Sar谋, A., Sutcu, M., Erdogmus, E., Hekimoglu, G.Production and characterization of natural clay-free green building brick materials using water treatment sludge and oak wood ash(2022) Archives of Civil and Mechanical Engineering, 22 (2), art. no. 79.
22. Palanti, S., Temiz, A., Demirel, G.K., Hekimo臒lu, G., Sar谋, A., Nazari, M., Jebrane, M., Schnabel, T., Terziev, N.Bio-Based Phase Change Materials for Wooden Building Applications(2022) Forests, 13 (4), art. no. 603.
23. Gencel, O., Ustaoglu, A., Benli, A., Hekimo臒lu, G., Sar谋, A., Erdogmus, E., Sutcu, M., Kaplan, G., Yavuz Bayraktar, O.Investigation of physico-mechanical, thermal properties and solar thermoregulation performance of shape-stable attapulgite based composite phase change material in foam concrete(2022) Solar Energy, 236, pp. 51-62.
24. Chopra, K., Tyagi, V.V., Pandey, A.K., Popli, S., Singh, G., Sharma, R.K., Sari, A.Effect of simultaneous & consecutive melting/solidification of phase change material on domestic solar water heating system(2022) Renewable Energy, 188, pp. 329-348.
25. Ouikhalfan, M., Hekimo?lu, G., Sari, A., Gencel, O., Tyagi, V.V.Metal Oxide Nanoparticle Dispersed-Polyethylene Glycol: Thermal Conductivity and Thermal Energy Storage Properties(2022) Energy and Fuels, 36 (5), pp. 2821-2832.
26. Hekimo臒lu, G., Sar谋, A., 脰nal, Y., Gencel, O., Tyagi, V.V., Aslan, E.Utilization of waste apricot kernel shell derived-activated carbon as carrier framework for effective shape-stabilization and thermal conductivity enhancement of organic phase change materials used for thermal energy storage(2022) Powder Technology, 401, art. no. 117291.
27. Gencel, O., Yaras, A., Hekimo臒lu, G., Ustaoglu, A., Erdogmus, E., Sutcu, M., Sar谋, A.Cement based-thermal energy storage mortar including blast furnace slag/capric acid shape-stabilized phase change material: Physical, mechanical, thermal properties and solar thermoregulation performance(2022) Energy and Buildings, 258, art. no. 111849.
28. Kothari, R., Pandey, A., Ahmad, S., Singh, H.M., Pathak, V.V., Tyagi, V.V., Kumar, K., Sari, A.Utilization of Chlorella pyrenoidosa for Remediation of Common Effluent Treatment Plant Wastewater in Coupling with Co-relational Study: An Experimental Approach(2022) Bulletin of Environmental Contamination and Toxicology, 108 (3), pp. 507-517.
29. Hekimo臒lu, G., Sar谋, A., Gencel, O., Tyagi, V.V.Thermal conductivity enhancement of silica fume based composite thermal energy storage material using different carbon nanomaterials(2022) Energy and Buildings, 257, art. no. 111789.
30. Tuzen, M., Sar谋, A., Afshar Mogaddam, M.R., Kaya, S., Katin, K.P., Altunay, N.Synthesis of carbon modified with polymer of diethylenetriamine and trimesoyl chloride for the dual removal of Hg (II) and methyl mercury ([CH3Hg]+) from wastewater: Theoretical and experimental analyses(2022) Materials Chemistry and Physics, 277, art. no. 125501.
31. Azam, R., Kothari, R., Singh, H.M., Ahmad, S., Sari, A., Tyagi, V.V.Cultivation of two Chlorella species in Open sewage contaminated channel wastewater for biomass and biochemical profiles: Comparative lab-scale approach(2022) Journal of Biotechnology, 344, pp. 24-31.
32. Gencel, O., Harja, M., Sar谋, A., Hekimo臒lu, G., Ustao臒lu, A., Sutcu, M., Erdogmus, E., Kaplan, G., Bayraktar, O.Y.Development, characterization, and performance analysis of shape-stabilized phase change material included-geopolymer for passive thermal management of buildings(2022) International Journal of Energy Research.
33. Yaras, A., Nodehi, M., Ustaoglu, A., Arslanoglu, H., Sar谋, A., Gencel, O., Ozbakkaloglu, T.Cleaner production of polyurethane (PU) foams through use of hydrodesulfurization (HDS) spent catalyst(2022) Environmental Science and Pollution Research.
34. Al-Ahmed, A., Sari, A., Khan, F., Al-Rasheidi, M., Hekimo臒lu, G., Afzaal, M., Alsulami, A.A., Dafalla, H., Salhi, B., Alsulaiman, F.A.A Novel Layered Double Hydroxide and Dodecyl Alcohol Assisted PCM Composite with High Latent Heat Storage Capacity and Thermal Conductivity(2022) Journal of Thermal Science.
35. Hekimo臒lu, G., Sar谋, A.Shape stabilized attapulgite/myristic-palmitic acid composite PCM for thermal energy storage implementations in buildings(2022) Materials Today: Proceedings, 58, pp. 1350-1353.
36. Hekimo臒lu, G., Sar谋, A.A review on phase change materials (PCMs) for thermal energy storage implementations(2022) Materials Today: Proceedings, 58, pp. 1360-1367.
37. Co艧anay, H., Selimefendigil, F., 脰ztop, H.F., Sar谋, A.Experimental Analysis of Melting Behavior of Capric Acid (CA)?Stearic Acid (SA) Eutectic Mixture and its 3D Numerical Solution of Natural Convection in a Cup(2022) Arabian Journal for Science and Engineering.
38. Hekimo臒lu, G., Sar谋, A., Gencel, O., Tyagi, V.V.Thermal energy storage characteristics of polyacrylic acid/dodecanol/carbon nanofiber composites as thermal conductive shape-stabilized composite phase change materials(2022) International Journal of Energy Research, 46 (14), pp. 20873-20885.
39. Singh, G., Chopra, K., Tyagi, V.V., Pandey, A.K., Sharma, R.K., Sari, A.Estimation of thermodynamic and enviroeconomic characteristics of khoa (milk food) production unit(2022) Environment, Development and Sustainability, 24 (11), pp. 12542-12581.
40. Saleh, T.A., Sar谋, A., Tuzen, M.Simultaneous removal of polyaromatic hydrocarbons from water using polymer modified carbon(2022) Biomass Conversion and Biorefinery.
41. Tyagi, V.V., Chopra, K., Sharma, R.K., Pandey, A.K., Tyagi, S.K., Ahmad, M.S., Sar谋, A., Kothari, R.A comprehensive review on phase change materials for heat storage applications: Development, characterization, thermal and chemical stability(2022) Solar Energy Materials and Solar Cells, 234, art. no. 111392.
42. Holy, S., Temiz, A., K枚se Demirel, G., Aslan, M., Mohamad Amini, M.H.Physical properties, thermal and fungal resistance of Scots pine wood treated with nano-clay and several metal-oxides nanoparticles(2022) Wood Material Science and Engineering, 17 (3), pp. 176-185.
43. Varol, T., G眉ler, O., Ak莽ay, S.B., Aksa, H.C.Novel advanced copper-silver materials produced from recycled dendritic copper powders using electroless coating and hot pressing(2022) Powder Metallurgy.
44. Yalcin, E.D., Canakci, A., Erdemir, F.Wear and Mechanical Behavior of ZA27 Alloy Reinforced with B4C Produced by Powder Metallurgy Method(2022) Gazi University Journal of Science, 35 (4), pp. 1572-1583.
45. Vignesh, S., Jappes, J.T.W., Adam, K.M., Varol, T.Mechanical Loading and Tribological Studies on Boron Carbide (B4C) and Lead (Pb) Particles Dispersed Epoxy-Based Multilayered Composites(2022) Advances in Materials Science and Engineering, 2022, art. no. 4029882.
46. 脟别濒别产颈, M., 脟anak莽谋, A., G眉ler, O., 脰zkaya, S., Karabacak, A.H., Arpac谋, K.A.Investigation of Microstructure, Hardness and Wear Properties of Hybrid Nanocomposites with Al2024 Matrix and Low Contents of B4C and h-BN Nanoparticles Produced by Mechanical Milling Assisted Hot Pressing(2022) JOM, 74 (11), pp. 4449-4461.
47. Varol, T., G眉ler, O., Ak莽ay, S.B., 脟uvalc谋, O.Enhancement of electrical and thermal conductivity of low-cost novel Cu?Ag alloys prepared by hot-pressing and electroless plating from recycled electrolytic copper powders(2022) Materials Chemistry and Physics, 281, art. no. 125892.
48. Ak莽ay, S.B., Varol, T., G眉ler, O., Aksa, H.C.Effect of Boron Carbide Reinforcement Amount on the Properties of Boron Carbide Reinforced Al Based Composites(2022) El-Cezeri Journal of Science and Engineering, 9 (2), pp. 869-881.
49. Khalid, F., Saleem, M., Jabbar, H., Tanvir, M.G., Butt, M.S., Baluch, A.H., Ghaffar, A., Ahsan, M., Malik, R.A., Alver, U., Alrobei, H., Rehman, Z.D., Alzaid, M., Khan, M.Z.Improved super capacitive performance of hydrothermally developed Mn and Ni oxides along with activated carbon as ternary nanocomposite(2022) Journal of Physics and Chemistry of Solids, 161, art. no. 110467.
50. I莽in, K., 脰zt眉rk, S., 脟ak谋l, D.D., S眉nb眉l, S.E., Ergin, 陌., 脰z莽elik, B.Investigation of nano-crystaline strontium hexaferrite magnet powder from mill scale waste by the mechanochemical synthesis: Effect of the annealing temperature(2022) Materials Chemistry and Physics, 290, art. no. 126513.
51. Aksa, H.C., Hac谋saliho臒lu, 陌., Y谋ld谋z, F., Varol, T., G眉ler, O., Kaya, G., Ak莽ay, S.B.Effects of fabrication parameters and post-processing treatments on the mechanical and tribological behavior of surface-enhanced copper based materials by selective laser melting(2022) Journal of Materials Processing Technology, 304, art. no. 117564.
52. 脰zt眉rk, S., Alptekin, F., 脰nal, S., S眉nb眉l, S.E., 艦ahin, 脰., 陌莽in, K.Effect of titanium addition on the corrosion behavior of CoCuFeNiMn high entropy alloy(2022) Journal of Alloys and Compounds, 903, art. no. 163867.
53. S眉nb眉l, S.E., 陌莽in, K., Ero臒lu, M., 脰zt眉rk, S.Effect of the Mn Amount on the Structural, Thermal, and Magnetic Properties of Rapidly Solidified (87-x)Cu-13Al-xMn (wt.%) Alloy Ribbons(2022) Journal of Materials Engineering and Performance, 31 (4), pp. 2761-2769.
54. Varol, T., G眉ler, O., Ak莽ay, S.B., 脟olak, H.The evolution of microstructure and properties of Cu-Cr alloys synthesized via flake powder metallurgy assisted by mechanical alloying and hot pressing(2022) Materials Today Communications, 33, art. no. 104452.

听

2023 Y谋l谋